Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

thermocouple wire

Views: 3006

when I order a thermocouple wire for doing oven profiles, it... - Jul 20, 2006 by fordf1502004  

based on experience, no significant change. ... - Jul 21, 2006 by Reypal  

How do you plan on fusing the wires back together ? ... - Jul 21, 2006 by Sr. Tech  

Cut the loose ends and not the couple? Russ ... - Jul 21, 2006 by RDR  

The ones we use are sealed on the plug end. ... - Jul 21, 2006 by Sr. Tech  

you can use a thermocouple welder to fuse the wires back. as... - Jul 21, 2006 by Amol Kane  

Not to argue, but you can use a spot welder to fuse thermoco... - Jul 21, 2006 by davef  

Addressing the issue "Will cutting change the readings?" Ver... - Jul 24, 2006 by nodlac  


fordf1502004

#42843

thermocouple wire | 20 July, 2006

when I order a thermocouple wire for doing oven profiles, it comes in a standard length of 36 inches, will there be any effects if I were to cut the wire down to 9 inches? Will cutting change the readings?

reply »


Reypal

#42853

thermocouple wire | 21 July, 2006

based on experience, no significant change.

reply »


Sr. Tech

#42866

thermocouple wire | 21 July, 2006

How do you plan on fusing the wires back together ?

reply »


RDR

#42874

thermocouple wire | 21 July, 2006

Cut the loose ends and not the couple?

Russ

reply »


Sr. Tech

#42882

thermocouple wire | 21 July, 2006

The ones we use are sealed on the plug end.

reply »


Amol Kane

#42884

thermocouple wire | 21 July, 2006

you can use a thermocouple welder to fuse the wires back. as a matter of fact we use the welder to create thermocouple junctions. this is way less expensive that buying already formed thermocouple junctions.

reply »


davef

#42886

thermocouple wire | 21 July, 2006

Not to argue, but you can use a spot welder to fuse thermocouple wires, also.

reply »


nodlac

#42913

thermocouple wire | 24 July, 2006

Addressing the issue "Will cutting change the readings?" Very Very Doubtful.

Here is a link to a helpful guide.

http://www.omega.com/techref/

Enjoy, cal

reply »

SMT spare parts - Qinyi Electronics
SMT & Related Equipment - Delta Tau Data Systems Inc.
Now Online
8
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Fixate labor costs with selective soldering solutions
Get your business noticed
Comprehensive Analytical Services and Support

Software for SMT