Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
IC short

IC short

Subscribe to Thread

How to problem solved about production reject IC short? Ple... - Jan 18, 2007 by Tonang

What is your setting on screen mask printer, stering solder ... - Jan 18, 2007 by

A little more detail may help. Is it just a bridging pro... - Jan 18, 2007 by pcbatech

do chek the suppot pin on maschin? ... - Jan 18, 2007 by

oho me good! ... - Jan 18, 2007 by

Production reject IC short? So there is a solderbridge on yo... - Jan 18, 2007 by Dback

print less paste, and make sure that part is aligned properl... - Jan 19, 2007 by RDR

Maybe it's a trace. ... - Jan 19, 2007 by Real Chunks

What is the part designator? A lot has to do with that. Al... - Jan 19, 2007 by

What pitch IC? Perhaps a nickel stencil will work. Are you... - Jan 19, 2007 by

Tonang, you should learn the process before you accept the j... - Jan 19, 2007 by

Things to consider... Print alignment - Use off contact Pr... - Jan 19, 2007 by

We use M/C printer Samsung SP400V with M/C setting : - Auto... - Jan 29, 2007 by Tonang

"So I jump ship in Hong Kong, and I get on as a looper in th... - Jan 29, 2007 by

Tonang

#46795

IC short | 18 January, 2007

How to problem solved about production reject IC short? Please advice us about setting screen mask printer, stering solder paste, profile reflow etc

Thank you for your attention and cooperation

Best regard,

Tonang

reply »

Heywood Jablowme

#46800

IC short | 18 January, 2007

What is your setting on screen mask printer, stering solder paste, profile reflow etc?

reply »

pcbatech

#46806

IC short | 18 January, 2007

A little more detail may help.

Is it just a bridging problem? Is the IC backwards?

and what is your current setup. This may help you get better responses.

reply »

Diep Nguyen

#46809

IC short | 18 January, 2007

do chek the suppot pin on maschin?

reply »

dphilbrick

#46810

IC short | 18 January, 2007

oho me good!

reply »

Dback

#46813

IC short | 18 January, 2007

Production reject IC short? So there is a solderbridge on your IC?

What type of IC?

A few things to consider:

1.- Too much paste during screen printing because you may not have enough PCB support

You need to provide as much details as possible ( type of paste, type of IC etc ) other wise people on this forums tend to get a bit sarcastic.

reply »

RDR

#46837