Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMT/ PCT edge conveyor replacement belts

Views: 6899

Does anyone kbnow where I can find replacement belts for the... - Dec 07, 2007 by ehess  

I have ordered 3/16th and 1/4 from McMaster Carr in the past... - Dec 07, 2007 by Bruce Anderson  

Thanks Bruce. This method is working good for me, for now a... - Dec 12, 2007 by ehess  

How do you melt it together ? ... - Dec 13, 2007 by Sr. Tech  

I would never have guessed that McM-Carr would carry that st... - Dec 13, 2007 by Steve Thomas  

I have been able to have endless loop edge conveyor belts ma... - Dec 14, 2007 by Gary R. Camac  

I have had luck with New England Belting: ... - Dec 14, 2007 by floydf  


ehess

#52831

SMT/ PCT edge conveyor replacement belts | 7 December, 2007

Does anyone kbnow where I can find replacement belts for the old PCT (Process control Technologies) conveyors?

reply »

Bruce Anderson

#52832

SMT/ PCT edge conveyor replacement belts | 7 December, 2007

I have ordered 3/16th and 1/4 from McMaster Carr in the past. you buy it bulk cut it at an angle and melt it together.

I think its Mcmastercarr.com and look into belts or conveyor belting you should be able to find it online there.

reply »


ehess

#52863

SMT/ PCT edge conveyor replacement belts | 12 December, 2007

Thanks Bruce. This method is working good for me, for now anyway. I'll have to see how good my splices hold up over time.

reply »


Sr. Tech

#52874

SMT/ PCT edge conveyor replacement belts | 13 December, 2007

How do you melt it together ?

reply »


Steve Thomas

#52878

SMT/ PCT edge conveyor replacement belts | 13 December, 2007

I would never have guessed that McM-Carr would carry that stuff (antistatic belts) but you learn something new every day....thanks!

Question, though. Their online catalog says to order by the inch of circumference (OC, or outer circle), implying that you get a finished belt and not a length needing end bonding/welding/gluing/whatever.... not true?

reply »

Gary R. Camac

#52894

SMT/ PCT edge conveyor replacement belts | 14 December, 2007

I have been able to have endless loop edge conveyor belts made for me at Sparks Belting Company. http://www.sparksbelting.com/

reply »


floydf

#52899

SMT/ PCT edge conveyor replacement belts | 14 December, 2007

I have had luck with New England Belting: http://www.newenglandbelting.com/ Good Luck

reply »

Flux-Free Reflow Soldering
IPC Certification Training Schedule
Now Online
7
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Electronics Equipment Consignment
IPC/WHMA-A-620 training
best reflow oven

Reflow System