Less solder with fine pitch qfp

Subscribe to Thread

We r facing less soder problem with qfp,using 4 mil tencil ... - Sep 29, 2008 by manish

Let's narrow this down. Questions are: * Are you putting th... - Sep 29, 2008 by davef

What pitch? You can go 5 mil or even 6 mil stencils dependi... - Sep 30, 2008 by Real Chunks

manish

#56734

Less solder with fine pitch qfp | 29 September, 2008

We r facing less soder problem with qfp,using 4 mil tencil and lead free paste,tried out different combinations of reflow profile,can anybody suggest?

reply »

davef

#56741

Less solder with fine pitch qfp | 29 September, 2008

Let's narrow this down. Questions are: * Are you putting the proper amount of solder in the board with your stencil print process? * If you are putting the proper amount of solder in the board, where is the solder going?

Pick one and then fill-in the blanks to bring us upto speed.

reply »

Real Chunks

#56756

Less solder with fine pitch qfp | 30 September, 2008

What pitch? You can go 5 mil or even 6 mil stencils depending on your screen printer.

Also what do you consider "less solder"? What defect are you having. Remember on a QFP you use the heel filet to determine proper solder joint - not the toe.

reply »

Reese

#56790

Less solder with fine pitch qfp | 2 October, 2008

We had similar issues until we went to a 6 mil stencil thickness.

reply »