SMT package to feeder size chart

Subscribe to Thread

Was wondering if anyone has a general chart matching SMT pac... - Oct 23, 2008 by User

Actually 0603 is 8mm x 4mm pitch. 0201 and 0402 are 8mm x 2... - Oct 29, 2008 by A Very Frazzled Man

Oddly enough, I find it more often than not that the supply ... - Nov 03, 2008 by FD

Maybe..... ...but it's not like I was wrong. I was only try... - Nov 06, 2008 by A Very Frazzled Man

Hi, most common parts were mentioned already. For all the... - Nov 07, 2008 by emil

You might want to check out the empty feeder tape supplier w... - Nov 07, 2008 by Stephen

User

#57082

SMT package to feeder size chart | 23 October, 2008

Was wondering if anyone has a general chart matching SMT package size with tape feeder size. E.g 0602: 8mm Tape 2mm pitch.

Cheers.

reply »

A Very Frazzled Man

#57117

SMT package to feeder size chart | 29 October, 2008

Actually 0603 is 8mm x 4mm pitch. 0201 and 0402 are 8mm x 2mm pitch. 0603, 0805, 1206, 1210 are 8mm x 4mm pitch. Tant Caps 3216 & 3528 packages are 8mm X 4mm pitch. 6032 and 7343 are 12mm X 8mm pitch.

ICs, Diodes, Transistors are various sizes and depend on the carrier tape. But you can usually figure out the carrier tape info from the Part Data Sheet.

Hope this helps!

reply »

#57155

SMT package to feeder size chart | 3 November, 2008

Oddly enough, I find it more often than not that the supply type is not mentioned in the data sheets.

And if the original author was saying 0603 in a metric package, then it would be in 8x2 tape. Even in the US, some companies use the metric names for package sizes. One of the companies we build boards for call them by their metric names.

Anyways, back to the original question: you can download the catalogs from Practical Components and Topline Components and they would indicate the tape size on all the basic package types for most common SMT packages.

reply »

A Very Frazzled Man

#57192

SMT package to feeder size chart | 6 November, 2008

Maybe..... ...but it's not like I was wrong. I was only trying to help. And I certainly didn't belittle him in any way shape or form. So why do have to get all up in my Biz-nass about it? Huh? You wanna go? Let's go! Go ahead...make your move...I've ped bigger dudes I'm sure. ; )

Sorry...slow day. I'm a little bored.

reply »

emil

#57202

SMT package to feeder size chart | 7 November, 2008

Hi,

most common parts were mentioned already. For all the rest you will have the simple counting we all do. Distanse between two holes in the tape is 4mm. You dont need special software for that.

packages for passive parts you will learn fast.

reply »

Stephen

#57203

SMT package to feeder size chart | 7 November, 2008

You might want to check out the empty feeder tape supplier websites. If you have a part they want to make sure it's easy to find the right tape size so you can buy it from them.

reply »