Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Conformal Coat Dip Tank Supplier

#6148

Conformal Coat Dip Tank Supplier | 1 May, 2001

We've been using a Glenpro 2143 Dip Tank [We offer bonus points for the wackiest retort on "dip tanks". Michael, I've got money on you.] to conformal coat boards.

We can't find Glenpro. They used to be located on McBride Ave in Paterson NJ. Any contacts? If we can't find them; who a makes a good, cheap dip tank?

reply »

Michael Parker

#6156

Conformal Coat Dip Tank Supplier | 2 May, 2001

I was a bit amused the way you "tanked" that dip John. I mean you skewered him without benefit of remoulade, that puppy was tarred and feathered, chopped, chromed, toasted!!! I was a bit surprised that you chose to get back into the thread, it didn't seem worthy to waste your vast resources on the guy. I guess you had to protect your rep and not be tagged as having a sue dough nym just to stir up a little interest. You are crafty enough without having to resort to cheap tricks.

reply »

Michael Parker

#6459

Conformal Coat Dip Tank Supplier | 2 May, 2001

As a second thought, just to address your problem, try contacting a local fabrication shop for restaurant supply. They are used to working with stainless steel. I once had a complete sink/workstation top fabricated to my specs. for a fraction of the cost of a COTS unit (which didn't have the dimensions I needed anyway).

Betcha some good Californy vino it will be cheaper and faster.

reply »

#6461

Conformal Coat Dip Tank Supplier | 2 May, 2001

Silvio Dante (played by former E Street Band Guitarist Steve Van Zandt, in his acting debut) has even turned an extremely passing resemblance to Al Pacino [Godfather, Part III] into a personality; he�s forever curling down the corners of his mouth and launching into ... "Every time I managed to get away they keep pulling me back in!"

reply »

#6462

Conformal Coat Dip Tank Supplier | 2 May, 2001

I hear ya and yer probably correct, but the drives on the pup are whipped and I wasn't aimin to spend much time with it, yano. Just order some parts, slap 'em in, and get bustin'. But that just may not be what Ima gunna do, whether I like it or not.

reply »

Jetting Pump for Integration

IPC Certification Training Schedule IPC Questions and answers