SMT OEE Calculator

Subscribe to Thread

How to calculate Availability in SMT mcs? IDeal Rated CPH o... - Nov 06, 2009 by Martin

Martin Pls find the link for the SMT OEE calculator. ... - Nov 06, 2009 by Jagadeesh Rajagopalan

Excellent Web OEE calculator... For Ideal Cycle time we u... - Nov 08, 2009 by Rao

Pls explain which one need to consider for Product cycle tim... - Nov 08, 2009 by Martin

Is this machine capacity constrained? Are you using IPC-9... - Nov 08, 2009 by davef

No the machine is not capacity constrained. We do not use... - Nov 09, 2009 by Martin

If the machine is not capacity constrained, what is the poin... - Nov 09, 2009 by davef

Martin

#60345

SMT OEE Calculator | 6 November, 2009

How to calculate Availability in SMT mcs? IDeal Rated CPH or Machine programming time? Pls send me SMT OEE Calculator

reply »

Jagadeesh Rajagopalan

#60346

SMT OEE Calculator | 6 November, 2009

Martin Pls find the link for the SMT OEE calculator.

Attachments:

SMTechIndiaOEE.Html

reply »

Rao

#60362

SMT OEE Calculator | 8 November, 2009

Excellent Web OEE calculator...

For Ideal Cycle time we use to take Programming Cycle Time but in this calculator it seems you have taken Equipment Rated CPH. For a Given Board & the placement locations the rated CPH is not at all attainable because the SMT equipment rated CPH is defined as the timetaken to pick a component from the feeder position & place on the board at minimum possible distance.

reply »

Martin

#60363

SMT OEE Calculator | 8 November, 2009

Pls explain which one need to consider for Product cycle time. 1) Machine Rated CPH or 2) Programming Cycle time.

reply »

davef

#60364

SMT OEE Calculator | 8 November, 2009

Is this machine capacity constrained?

Are you using IPC-9850 Surface Mount Placement Equipment Characterization?

reply »

Martin

#60365

SMT OEE Calculator | 9 November, 2009

No the machine is not capacity constrained.

We do not use IPC-9850. Rated CPH is taken from Equipment manufaturer. Fuji-CP643. Universal HSP4796 We have 3 manufaturing units at different location Difficult to standardize OEE calculation

reply »

davef

#60366

SMT OEE Calculator | 9 November, 2009

If the machine is not capacity constrained, what is the point of measuring how close to the optimum efficiency that it is operating? * Capacity of individual machies are unimportant, unless they are capacity contrained * Capacity of your line is dependent on the highest loaded machine

reply »