Degolding Pretinning

Subscribe to Thread

I look for specification for degolding - pretinning for SMT ... - May 02, 2010 by stephan

J-STD-001 is your base requirement, but MIL and SPACE have s... - May 02, 2010 by davef

You will want to look at the Mil Specs. I believe they are ... - May 05, 2010 by Flipit

stephan

#61733

Degolding Pretinning | 2 May, 2010

I look for specification for degolding - pretinning for SMT and through hole parts (in the military sector) . I found IPC JSTD 001 and some ECSS ...08 but without visual real criterias on the product. Thanks for your inputs .

reply »

davef

#61736

Degolding Pretinning | 2 May, 2010

J-STD-001 is your base requirement, but MIL and SPACE have stringent requirements for soldering gold plated terminals, e.g. this typical one:

http://xweb.nrl.navy.mil/glast/CALDesign/CDE/CAL%20DPD%20Wire%20Cable%20Soldering%20and%20Staking%20Spec%20Rev%202.doc

reply »

Flipit

#61763

Degolding Pretinning | 5 May, 2010

You will want to look at the Mil Specs. I believe they are all available online in pdf format at no cost. I am not certain what the latest spec is but Mil-Std-2000 absolutely has a section on this.

reply »