GSM-1 CEP Camera

Subscribe to Thread

I've been working to bring a Universal GSM-1 back to operati... - Sep 01, 2010 by eezday

Are you working in production mode or enhanced board set-up?... - Sep 01, 2010 by SWAG

enhanced board setup ... - Sep 01, 2010 by eezday

We had that happen on rare occasions and got the live vision... - Sep 01, 2010 by SWAG

I spoke to a field service rep from Universal and he also su... - Sep 02, 2010 by eezday

No, red light should be what you see from a PEC. ... - Sep 02, 2010 by SWAG

eezday

#62602

GSM-1 CEP Camera | 1 September, 2010

I've been working to bring a Universal GSM-1 back to operational readiness at a university. I have lots of pnp experience but little on the GSM. The software is at 3.2.3. When I try to manually "zero the board" in the PWC menu I get only a black screen. I believe I should be looking at video from the PEC camera. I see a red light on the head that shines down onto the PCB. Can anyone tell me what might be broken or more likely what I'm doing wrong?

reply »

SWAG

#62603

GSM-1 CEP Camera | 1 September, 2010

Are you working in production mode or enhanced board set-up?

reply »

eezday

#62604

GSM-1 CEP Camera | 1 September, 2010

enhanced board setup

reply »

SWAG

#62609

GSM-1 CEP Camera | 1 September, 2010

We had that happen on rare occasions and got the live vision display back by exiting enhanced board and re-entering or by power cylcing the machine. If that does not work, I don't know how to help you.

reply »

eezday

#62623

GSM-1 CEP Camera | 2 September, 2010

I spoke to a field service rep from Universal and he also suggested cycling the power on the machine. Unfortunately this didn't help me but I see a trend. I'm still open to any suggestion. I'm wondering, should I see a bright white light when the CEP camera should be operating? I only see a red light now.

reply »

SWAG

#62625

GSM-1 CEP Camera | 2 September, 2010

No, red light should be what you see from a PEC.

reply »