solder paste printing

Subscribe to Thread

How can I print two various heights of solder paste on the s... - Jan 27, 2011 by eliezerk

Mydata MY500 ... - Jan 27, 2011 by Sr. Tech

Print then dispense in the areas you need extra paste. Why ... - Jan 28, 2011 by Graham

Use tape and reeled solder preforms and place them where eve... - Jan 28, 2011 by LarryD

Milara has a combined Stencil printer + jet Printing ??? ... - Jan 28, 2011 by josh

eliezerk

#63640

solder paste printing | 27 January, 2011

How can I print two various heights of solder paste on the same board , no space for graded stencil

reply »

Sr. Tech

#63645

solder paste printing | 27 January, 2011

Mydata MY500

reply »

Graham

#63649

solder paste printing | 28 January, 2011

Print then dispense in the areas you need extra paste. Why can you not use a stencil which has areas etched away around component patterns to thin the stencil down....for example a 150 micron thick stencil etched to 120 or 100 microns in specific areas. What are the thicknesses of paste you need ?

reply »

LarryD

#63653

solder paste printing | 28 January, 2011

Use tape and reeled solder preforms and place them where ever you need more solder volume.

reply »

josh

#63663

solder paste printing | 28 January, 2011

Milara has a combined Stencil printer + jet Printing ???

Print and then jet print areas not printed or top up prints.

reply »