Questions on juki 740

Subscribe to Thread

I am thinkingof purchasing a juke 740. The seller told me th... - Mar 23, 2011 by bwjm

bwjm, We have placed 0402's with 740 and it worked well... - Mar 23, 2011 by charliem

Charlie, thanks for the reply. But I am still unclear with t... - Mar 23, 2011 by bwjm

No - the factory 740 spec says that it will go down to an 04... - Mar 23, 2011 by SMTequip, USA

Hello Scott, We have sold modified 101 nozzles. They had a ... - Mar 23, 2011 by FredC

So if i purchase the modified nozzle, am i able to place 020... - Mar 24, 2011 by bwjm

bwjm

#64003

Questions on juki 740 | 23 March, 2011

I am thinkingof purchasing a juke 740. The seller told me that the machine is capable of mounting down to 0402 and 0.5mm ic pitch, but I search the net I realize that it is able to mount 01005 and ic pitch 0.3mm. So is my machine seller's information correct?

Need help..... Thanks a lot

reply »

charliem

#64006

Questions on juki 740 | 23 March, 2011

bwjm,

We have placed 0402's with 740 and it worked well. When new (if 1005's existed then) maybe, but that sounds like a seller/manufacurer quoting specs. I would think all 740's being used are well used, so placement accuracy might not be per machine spec.

Charlie

reply »

bwjm

#64007

Questions on juki 740 | 23 March, 2011

Charlie, thanks for the reply. But I am still unclear with the machine capabilities. Does the standard ke740 able to place 01005 components or is it the machine was upgraded to place 01005? This is my first time getting a placement machine, I am quite worried about the spec. I have quite a few 0201 components to place. Hence, I was confused by the spec given b my seller and information on the net. Thanks!

reply »

SMTequip, USA

#64008

Questions on juki 740 | 23 March, 2011

No - the factory 740 spec says that it will go down to an 0402. I am a former Juki agent and sold many of these machines new. I now sell them used. If I can assist you let me know: smtequip@gmail.com. Thanks, Scott

reply »

FredC

#64009

Questions on juki 740 | 23 March, 2011

Hello Scott, We have sold modified 101 nozzles. They had a .25mm hole instead of standard. The customer ordered these for placing 0201s. Is it possible they were used on the 740 machine? Or maybe the 760? FredC

reply »

bwjm

#64015

Questions on juki 740 | 24 March, 2011

So if i purchase the modified nozzle, am i able to place 0201. How about the vision accuracy of machine. I'm quite confused now....... Between, Scott is there anything that i have to pay special attention when i pick my machine up, any advices?

THank you

reply »