fixed barcode scanners

Subscribe to Thread

Currently, we are using fixed barcode scanners that connect ... - Dec 13, 2011 by IT23

Try: ... - Dec 13, 2011 by davef

Hi, we use some camera based readers, they can scan all barc... - Dec 14, 2011 by Casper

I do have an affiliation with a scanner manufacturer and I a... - Dec 14, 2011 by eezday

IT23

#65643

fixed barcode scanners | 13 December, 2011

Currently, we are using fixed barcode scanners that connect to Cogiscan PFC box. The scanners are mounted using a flexible arm. The flexible arm is hard to adjust so that the scanner will be on top of the label every time it hits the sensor. I'm looking for some ways (or product) on how I can mount the scanners and able to adjust easily to where the label located on the board. Different assembly/boards have each own label position, so it's not the same all the time.

reply »

davef

#65644

fixed barcode scanners | 13 December, 2011

Try: http://www.cdw.com/shop/search/Printers-Scanners-Print-Supplies/Scanners/Scanner-Supplies-Accessories/result.aspx?w=PE6&SortBy=TopSellers

We have no relationship, nor receive benefit from the company referenced above.

reply »

Casper

#65646

fixed barcode scanners | 14 December, 2011

Hi, we use some camera based readers, they can scan all barcodes in a square of roughly 10 x 10 inches. We have some pcbs with 3-4 barcodes (linear, 2D barcodes), and it can read them all in one take. I can find more information if you need that.

reply »

eezday

#65650

fixed barcode scanners | 14 December, 2011

I do have an affiliation with a scanner manufacturer and I am interested in your problem. A picture of your current setup and the conditions under which you are having problems would help me to make better suggestions.

reply »