Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Shindenshi ESV-304 AOI not working

Shindenshi ESV-304 AOI not working

Subscribe to Thread

My Shindeshi ESV-304 is out of order because of its PC (Comp... - Feb 03, 2015 by Machman

HiRrmani, this is hommer from OurPCB Ltd in China. we are... - Feb 04, 2015 by hommer

Hi.. Hommer, I am not able to install the Vision tester sof... - Feb 05, 2015 by Machman

> Hi.. Hommer, I am not able to install the Vision >... - Feb 05, 2015 by sarason

Dear Sarason, Thanks. My XP is 32 bit version. what c... - Feb 05, 2015 by Machman

Even I have tried the same on Windows 2000, but problem rema... - Feb 05, 2015 by Machman

I'm not familiar with your machine but is it possible that t... - Feb 05, 2015 by Spoiltforchoice

Hi.. Spoiltforchoice.. Thanks for your comments. Yes thi... - Feb 05, 2015 by Machman

Machman

#73440

Shindenshi ESV-304 AOI not working | 3 February, 2015

My Shindeshi ESV-304 is out of order because of its PC (Computer System) failure, which was WIN NT/2000 based system. Can I use normal Windows XP PC for the same. If yes, Please help as I am facing lot of problems in its interfacing with PC.

reply »

hommer

#73450

Shindenshi ESV-304 AOI not working | 4 February, 2015

HiRrmani,

this is hommer from OurPCB Ltd in China. we are a professional pcb and pcba factory. Also we can design. Pls tell us you question, then we can tell our engineer and hope can help you.

There are our company web: http://www.ourpcbte.com ,hope is usefull for you.

Regards, Hommer

reply »

Machman

#73451

Shindenshi ESV-304 AOI not working | 5 February, 2015

Hi.. Hommer, I am not able to install the Vision tester software for ESV304 machine. It is giving an error in the installation "Unable to load HINST.dll" and software asks to re-install the same again. I tried a lot. but all in vain. Please help if you can.

reply »

sarason

#73453

Shindenshi ESV-304 AOI not working | 5 February, 2015

> Hi.. Hommer, I am not able to install the Vision > tester software for ESV304 machine. It is giving > an error in the installation "Unable to load > HINST.dll" and software asks to re-install the > same again. I tried a lot. but all in vain. > Please help if you can.

Is your new XP a 64 or a 32 bit version.

Without spending too much time on this, my first bet is that your Application has 16 bit components and this DLL smells of 16 bit Windows.

regards sarason

reply »

Machman

#73454

Shindenshi ESV-304 AOI not working | 5 February, 2015

Dear Sarason,

Thanks. My XP is 32 bit version. what can be done here?

reply »

Machman

#73455

Shindenshi ESV-304 AOI not working | 5 February, 2015

Even I have tried the same on Windows 2000, but problem remains the same.

reply »

Spoiltforchoice

#73456

Shindenshi ESV-304 AOI not working | 5 February, 2015

I'm not familiar with your machine but is it possible that this dll file is looking for a security dongle of some kind ? This might be a small USB key, a USB device installed on one of the internal headers on the motherboard or something on a serial/parallel port. Alternatively how confident are you of your installation media. CD-R's can degrade significantly in 10 years and can cause all sorts of dll hell.

reply »

Machman

#73458

Shindenshi ESV-304 AOI not working | 5 February, 2015

Hi.. Spoiltforchoice..

Thanks for your comments. Yes this system uses a parallel port Protect key and drivers for the same are already installed and that generates a "Hinstd.dll", and it is there in the syatem32 folder. but my software installation asks for "Hinst.dll".

reply »