Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


GSM AXIS ERROR

Views: 2652


kai

#75632

GSM AXIS ERROR | 2 May, 2016

Hi any of you guys has happened this error in GSM and machines as they could fix it " AXIS X2 Error Not Recognized During move home command"

reply »


Tom

#75634

GSM AXIS ERROR | 2 May, 2016

Is this a dual-beam GSM2? Check to make sure the machine configuration is correct for the machine, otherwise I would look at encoders for the axis and electrical connections.

reply »


Tom

#75650

GSM AXIS ERROR | 3 May, 2016

Also it might be a failed axis controller card in the VME; check for any red fail lights.

reply »


kai

#75660

GSM AXIS ERROR | 5 May, 2016

check the cards in the VME and also the exchange and nothing happened . check the configuration of the servo beam 1 x1 and x2 Bean 2 and are working well , switch harnesses x1 and x2 and now fails BEAM 1 x1

reply »


Tom

#75688

GSM AXIS ERROR | 9 May, 2016

You may want to search the UIC knowledge base for troubleshooting. If you do not have access to UIC's website (second hand machine) you can call and register your machine for $500.

reply »

IPC Certification Training Schedule IPC Questions and answers

Software for SMT