Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Low Tack Double Sided Tape

Views: 2950

#75703

Low Tack Double Sided Tape | 11 May, 2016

When running NPI's we used to use a Letraset Low Tack Double Sided Tape to place components onto the PCB to verify placement and to ensure that the program is correct. Letraset have stopped making the tape, what do others use?

reply »

#75705

Low Tack Double Sided Tape | 11 May, 2016

we use Scotch Removable Double Sided Tape

reply »

#75837

Low Tack Double Sided Tape | 3 June, 2016

Same here. Buy it by the 2-pack at Staples. If the tape does not get used often we pull off about 5 inches and discard before we use it. The exposed tape between the cutter and the roll, and 1 rotation around the outside of the roll attracts dust and sometimes does not adhere well. That is the disadvantage of any double-sided tape.

reply »

IPC Certification Training Schedule

Facility Closure