Fuji CP6 and IP3 specifications request

Subscribe to Thread

Does anyone have the technical specifications for the Fuji C... - Aug 04, 2016 by SuMoTe

The IP3 specs are: PCB Dimensions Max: 508 mm x 457 mm - Mi... - Aug 05, 2016 by jdengler

Jerry, Thank you! Anyone have the CP6 specs? ... - Aug 08, 2016 by SuMoTe

You may be able to get the specs from one of the used equipm... - Aug 08, 2016 by jdengler

•Rated Speed of 40,000 CPH •140 - 8mm Device Locations •... - Aug 09, 2016 by Sr. Tech

SuMoTe

#76109

Fuji CP6 and IP3 specifications request | 4 August, 2016

Does anyone have the technical specifications for the Fuji CP6 and the Fuji IP3? Looking for the placement speed (parts per hour), accuracy, smallest/largest component size, fine-pitch (what size it can do). Our new sales guy is putting together something that he can hand out to perspective customers and has asked me if I can supply this information.

These machines seem to be of a vintage that this information is not readily available on the internet. Can someone help me out with this?

Thank you for any help.

reply »

jdengler

#76113

Fuji CP6 and IP3 specifications request | 5 August, 2016

The IP3 specs are: PCB Dimensions Max: 508 mm x 457 mm - Min: 80mm x 50mm Thickness: 0.8 to 4.0mm

Component Capacity Tape: 74 - 8/12mm Device Locations Tray: 40 Locations

Placing Rate: 0.55 sec/component for small chips 1.25 sec/component for ICs 2.50 Sec/component for tray components

Applicable Components 0402 to 74x74mm

Placing Accuracy: Within ±0.025mm for 4-side leaded components ±0.01 for other components

Jerry