Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


CAM350 v12, DFMStream

Views: 4037

#77360

CAM350 v12, DFMStream paste mask checks | 6 April, 2017

Good afternoon,

I am looking for experienced CAM350 users here. I might have found a bug in DFMStream paste mask checks. If you have experience with CAM350, please reply and I will describe the issue.

Any input would be really appreciated.

Regards, Pavel

reply »

#77413

CAM350 v12, DFMStream paste mask checks | 18 April, 2017

Hello

Pavel ,I have many experience on CAM350 , may help you on it .

reply »

#77418

CAM350 v12, DFMStream paste mask checks | 18 April, 2017

Dear PCBFOX,

I use CAM350 v12.2 build 1135. I am trying to use CAM350 DFMStream module for paste mask layer check. Examination I am interested in most of all is "Paste Mask Layer Check - Missing Paste Mask on SMD Pads (MP)", i.e. missing stencil apertures.

In order to run this check I do next:

- import GERBER and drills - setup layer types in the layer table - add and setup DFMStream - intentionally delete one stencil aperture in order to see how examination works - run DFMStream

Having intentionally deleted an aperture, the problem is that DFMStream finds zero errors.

Important points is that there are no components in the design. If I manually define components than MP check will work.

What am I doing wrong? Is it possible to find missing stencil apertures for GERBER data only not having defined any components in the design.

Any input would be really appreciated.

Regards, Pavel

reply »

#77419

CAM350 v12, DFMStream paste mask checks | 18 April, 2017

Hi ,

you may add me skype , my skype account is " evan.2012", you can add me , and we can check on skype .

Best regards Evan

reply »

Fluid Dispense Pump Integration

SMT feeders