Yamaha pick and place

Subscribe to Thread

Would you recommend a Yamaha Pick and place? In terms of rel... - Apr 09, 2018 by Harly

Yes I would, most of our old Yamaha machines (before 2005) w... - Apr 10, 2018 by Robl

Harly

#80190

Yamaha pick and place | 9 April, 2018

Would you recommend a Yamaha Pick and place? In terms of reliability, accuracy, cph? We're looking for a pick and place that can deliver a 50 micron accuracy. What brands do you recommend for high accuracy placements?

reply »

Robl

#80200

Yamaha pick and place | 10 April, 2018

Yes I would, most of our old Yamaha machines (before 2005) will do 30-35 microns @ 3 sigma with the fine camera option. Our Jukis with His res camera's will hit it too.

You should be OK with most things after 1997 with the right camera choice (which can still be retrofitted), so YVL88-2, YVL88X, YVL88XG, YV100-2,YV1100X, YV100XG (Philips/Assembleon Topaz, Opal or Emerald, & X & Xii variants).

I would caveat that with some of the newer YS machines that only hit 50 microns on the spec sheet.

Is it accuracy of placement you are looking for or accuracy after reflow? as we have found that with pretty much any half decent machine we can put anything on the pads. It's the design of the stencil, pads, thermal reliefs, profile and paste choice that tend to keep it there.

reply »