Yestech B2 Aoi Brightness, how do I adjust?

Subscribe to Thread

Can anyone tell me how to adjust the B2 Brightness? Sometim... - Sep 26, 2018 by MM

This should help out. You should have a fairly large calibr... - Sep 27, 2018 by dontfeedphils

Thanks I will try to calibrate again. ... - Oct 04, 2018 by MM

I was unable to calibrate the Brightness step. The Pot was ... - Oct 05, 2018 by MM

Yea, probably need a new board, which may be tricky consider... - Oct 05, 2018 by dontfeedphils

#81108

Yestech B2 Aoi Brightness, how do I adjust? | 26 September, 2018

Can anyone tell me how to adjust the B2 Brightness? Sometimes it is hard to see the markings, because it is too dark. It has been awhile since I have done this. Thanks for any information.

reply »

dontfeedphils

#81113

Yestech B2 Aoi Brightness, how do I adjust? | 27 September, 2018

This should help out. You should have a fairly large calibration plate to use during this process as well.

Attachments:

YTV-1000 B2-B3 Calibration Procedure rev E.pdf [2.4M]

reply »

#81157

Yestech B2 Aoi Brightness, how do I adjust? | 4 October, 2018

Thanks I will try to calibrate again.

reply »

#81164

Yestech B2 Aoi Brightness, how do I adjust? | 5 October, 2018

I was unable to calibrate the Brightness step. The Pot was adjusted but would not brighten any further than 42. Im thinking I will need a new board or if someone knows what LED part number is used? Any information would be great. Thanks

reply »

dontfeedphils

#81166

Yestech B2 Aoi Brightness, how do I adjust? | 5 October, 2018

Yea, probably need a new board, which may be tricky considering how old these models are getting now.

I had a B2 at my last shop and we upgraded to a Koh Young Zenith 3D. At the time, Yestech told us the camera in the B2 would go for around 10k just because of part scarcity.

reply »