Picking and placing coils with a universal In-Line 7

Subscribe to Thread

I am a fairly new technician with a rather large electronics... - Jan 08, 2019 by JRogalski88

From the datasheet ... - Jan 08, 2019 by Evtimov

Try with "120F" type part number:48503503 or 1220 1240...red... - Jan 08, 2019 by Panaguru

I will try this, thank you! Out of curiosity what about an 0... - Jan 09, 2019 by JRogalski88

Maybe you have to contact your machine support they can modi... - Jan 09, 2019 by Panaguru

We can handle this challenge. If you would like to get an R... - Jan 24, 2019 by Nozzleman

JRogalski88

#81709

Picking and placing coils with a universal In-Line 7 | 8 January, 2019

I am a fairly new technician with a rather large electronics assembly company. Its been an ongoing issue to pick and place small coils using our Universal SMT machines. Curious if any if the seasoned techs at smt.net have any recommendations as far as nozzle types/sizes to use to pick and place 0908 coils with minimal attrition. All feed back is welcomed!

reply »

Evtimov

#81710

Picking and placing coils with a universal In-Line 7 | 8 January, 2019

From the datasheet

Attachments:

reply »

Panaguru

#81712

Picking and placing coils with a universal In-Line 7 | 8 January, 2019

Try with "120F" type part number:48503503 or 1220 1240...reduce pick up speed...

reply »

JRogalski88

#81718

Picking and placing coils with a universal In-Line 7 | 9 January, 2019

I will try this, thank you! Out of curiosity what about an 0807?? currently using an 1140 but there's still issues with that. I'm almost wondering if maybe parts just aren't sitting flat in the pocket so I'm getting pick and visioning issues.

reply »

Panaguru

#81721

Picking and placing coils with a universal In-Line 7 | 9 January, 2019

Maybe you have to contact your machine support they can modify special nozzle for that component...i dont know what else you can try...or just contact your support and ask them what to do...we had a similar problem with LED diode on our machine..and our support made nozzle special for that component

reply »

Nozzleman

#81815

Picking and placing coils with a universal In-Line 7 | 24 January, 2019

We can handle this challenge. If you would like to get an RFQ on a custom nozzle, please complete our form: http://www.cotinc.com/nozzle/

reply »