Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Looking for a PC or software for MPM SPM

Views: 4001

#81753

Looking for a PC or software for MPM SPM | 16 January, 2019

We have an older MPM SPM machine, circa 2001 that is having a hard time reading the PC hard drive. Worked fine until yesterday. We are looking for a software install package for it or, preferably, a PC with the software on it.

reply »

#81754

Looking for a PC or software for MPM SPM | 16 January, 2019

Do a clone of our harddisk onto an identical or larger size disk. There are plenty software utilities that will do this.

Ghost, Clonezilla, look up GitHub!

sarason

reply »

#81916

Looking for a PC or software for MPM SPM | 8 February, 2019

We are very close to having the printer up and running but have hit a snag that we hope someone has seen and can offer a work around. The machine does not have the auto stencil wiper attachment parts in it. Did not matter before the hard drive crash but now since we re-loaded the software the machine hangs up when resetting it at the Homing Wiper command. Just stops and sits there.... Any ideas??

reply »

#82095

Looking for a PC or software for MPM SPM | 4 March, 2019

Matt,

Go into configuration and turn off " Wiper "

reply »

#82098

Looking for a PC or software for MPM SPM | 4 March, 2019

Thanks, we found that and we are up and running. Thanks to all who replied.

reply »

Inline Cleaning Machine Hydro-clean Array

Manufacturing Software