Looking for someone who can fix the servo board of CP 4-2

Sai: I can't amswer your questions, but I can give you some leads to people that may be able to help you. Below is a list of companies that deal used equipment. Some refurbish equipment, others turn the equipment from seller to buyer. Good luck. Dave F

Broome Engineering,1010 Conklin Rd. Conklin NY 13748 607 779 5142 fax 7799 Insertech 2398 NPenn Rd, Unit 3, Hatfield PA 19440 215.822.8663fax0505 Pete Carry Craig Johnson JR Devices, PO Box 34, Rockwall TX 75087 972 771 6362 fax 6409 Dennis Ott Bill Petlock, 139 WMindaneo St. Rialto CA 92316 909.877.8900fax8902 Kitner Equipment, 392 Meeker RD., Vestal, NY 607.757.9808 fax754.7729 Bill Kintner K3 Equipment, 635 Dickson St, Endicott NY 13760 607 757 9645 fax 0644 Lewis & Clark, 18 Clinton Drive Unit 5 Hollis, NH 03049 603.594.4229fax0554 Frank Clark Giant Y 3223 Yale Way, Freemont CA 94538 510.657.1235fax4026 EMAT Systems 303.792.3475fax3479 Comdisco 800.266.34726 GE Capital 800.722.7719 Eastern Electronic Devices, 607 772 6700 Frank Clark/Grady Wittenburg/George Johnson PCE, 250 National Place, Suite 122, Longwood, FL 32750 800 472 9158fax 407 831 8845 Eric Forg Noakes Electronic Equipment 510 449 1899 fax 800 497 9818 Gary Pearson 619 723 3227 fax 3095 NEA Inc, East Hampstead, NH 03826 603 382 2271 fax 3960 Chris Lyser JMW Enterprises, 309 WPickele Ave., PO Box 130, Rushford MN 55971 507.864.7477 fax 2903 Rodney Allen, Paul Leifeld XYTek, 19431 WDavidson, Detroit MI 48223 313 838 6961 fax 3960

reply »

Fuji is usually the cheapest you will find. I think around $750 for them to repair it. the last time I checked they have an exclusive patent on their PCB backplane design so there would not be any real way to bench test it. they also have rights to the servo control boards, which are made by Yaskawa, which also makes universal servo packs, but you cannot use them for Fuji equipment. All in all, it probably would be cheapest to have Fuji rebuild it in the long run, plus it would have a warranty.

reply »