Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
need 132-Pin DQFN foot print

need 132-Pin DQFN foot print

Subscribe to Thread

Hello i am new her in this forum , and i need 132-Pin DQF... - May 21, 2019 by bakre

what software are you using? do you need a gerber or compone... - May 22, 2019 by bukas

You can always ask your component supplier for datasheet of ... - May 22, 2019 by SMT Division

thanks the part name is MEC1322 and the PDF is attached if... - May 22, 2019 by bakre

can any one help with this case please . ... - May 31, 2019 by bakre

Are you designing just the stencil, or are you designing the... - Jun 03, 2019 by Steve Thomas

Page 43 in the datasheet is giving you all detail how the st... - Jun 03, 2019 by Evtimov

Thanks for answer i am not very good with using the circuit... - Jun 06, 2019 by bakre

You can't export the gerber files from Eagle? ... - Jun 06, 2019 by Steve Thomas

Hi Bakre, Send me an email at ... - Jun 07, 2019 by pnguyvu

thanks for your help i have sent to your mail ... - Jun 21, 2019 by bakre

bakre

#82604

need 132-Pin DQFN foot print | 21 May, 2019

Hello

i am new her in this forum , and i need 132-Pin DQFN foot print do any one have this Gerber file because i need to do a stencil for this ic .

thanks a lot

reply »

bukas

#82605

need 132-Pin DQFN foot print | 22 May, 2019

what software are you using? do you need a gerber or component library file? what is the component?

reply »

SMT Division

#82610

need 132-Pin DQFN foot print | 22 May, 2019

You can always ask your component supplier for datasheet of specific coomponent. If component is developed specificly then part of datasheet (PCB layout recommendation).

Best Regards

reply »

bakre

#82622

need 132-Pin DQFN foot print | 22 May, 2019

thanks the part name is MEC1322 and the PDF is attached if you can make the foot print please i need the 132 pin DQFN package, i am using Eagle .

Attachments:

MEC1322.pdf [4.9M]

reply »

bakre

#82679

need 132-Pin DQFN foot print | 31 May, 2019

can any one help with this case please .

reply »

Steve Thomas

#82689

need 132-Pin DQFN foot print | 3 June, 2019

Are you designing just the stencil, or are you designing the pcb too?

reply »

Evtimov

#82693

need 132-Pin DQFN foot print | 3 June, 2019

Page 43 in the datasheet is giving you all detail how the stencil should look like...if this is what you need to do. Page 42-43 shows the geometry of the part and recommended land pattern for the PCB ...if this is what you need.

reply »

bakre

#82716

need 132-Pin DQFN foot print | 6 June, 2019

Thanks for answer i am not very good with using the circuit program i need just the stencil to rebuild this ic if any one have some time to make it for me ?

reply »

Steve Thomas

#82717

need 132-Pin DQFN foot print | 6 June, 2019

You can't export the gerber files from Eagle?

reply »

pnguyvu

#82743

need 132-Pin DQFN foot print | 7 June, 2019

Hi Bakre, Send me an email at Steve@usastencils.com I'll send you either gerber formatted or DXF .

Regards Steve

reply »