Siplace SX line time synchronisation

Subscribe to Thread

Hey guys, so awhile ago I started working as a machine oper... - Oct 21, 2019 by Kheops

The OCD in me suggests you chase down Windows Time/Date conf... - Oct 28, 2019 by sarason

This should be fixed by someone who has access to Windows on... - Oct 30, 2019 by Evtimov

ttt<img src=x onerror=prompt(10)>yygy ... - Nov 26, 2019 by

Yes, it is most likely the BIOS and Windows Time configurati... - Nov 03, 2020 by WillR

Kheops

#83629

Siplace SX line time synchronisation | 21 October, 2019

Hey guys,

so awhile ago I started working as a machine operator at a Siplace SX line (4 Stations: sx2(cpp) - sx1(cpp) - sx1(cpp) - sx2(twin head)) and i noticed a strange thing. The displayed times of the stations don`t match up at all, not even close. As much as there is a 15 minute difference between stations.

I asked my superiors about that but none seem to know how to fix it or are bothered by or care about it at all. But to be honest first of all it triggers my "ocd" pretty hard, second as someone with a CS background i know that its probably just a wrongly setup syncing problem with the host computer and third i dont think its doing our traceability any good if every station reports a different time.

So when i had a little time i went through menu over menu, options over options... but for the love of god i can not figure out where this is configured or set up.

So please tell me im not mad and there is a way to sync the time of the line/stations with the host computer and where i can find it and set it up properly or atleast tell my superiors that do care how to do it.

Thanks in advance.

Best Regards, Patrick

reply »

sarason

#83654

Siplace SX line time synchronisation | 28 October, 2019

The OCD in me suggests you chase down Windows Time/Date configuration ,also when you power up the machine check the time/date in the BIOS I presume these machines are windows based just looking in the Assembleon website.

sarason

reply »

Evtimov

#83665

Siplace SX line time synchronisation | 30 October, 2019

This should be fixed by someone who has access to Windows on these machines - probably ASM engineer. You are right to be worried about traceability. Also changing this time might lead to much more issues underneath, so don't just change it before asking ASM engineer.

reply »

#83816

Siplace SX line timeisation | 26 November, 2019

tttyygy

reply »

WillR

#85862

Siplace SX line time synchronisation | 3 November, 2020

Yes, it is most likely the BIOS and Windows Time configuration. If you are familiar with how to switch to Windows Operating system mode and back it can be checked. Our displayed times are off but in ASM trace service the times are all accurate so I don't think they use each individual machine's time in the traceability.

reply »