Juki / Zevatech 740 vision (VCS) offset calibration

Hey everyone,

I hope all of you doing well this time of the year.

We have an old Juki / Zevatech 740 pick and place machine and we got a problem with the vision alignment, every placement is off by 2mils.

How can you run an offset calibration on the VCS? At the self-calibration menu when you run the calibration for the VCS with the calibration block it is only calibrates the threshold but not the offset.

On our other pick and place machine (Juki 2080) there is an option at the self-calibration menu to calibrate the offset for the VCS, but no option for that on the 740.

I did checked the manual but there is no information about this in it.

reply »