Pinout for Quad CP30/CP40 Feeder connector

Subscribe to Thread

Hello, Trying to re-purpose a QUAD feeder for delivering sm... - Jul 08, 2020 by Tyler Robertson

12vdc on top pin 5vdc on bottom pin ground on second pin up ... - Jul 09, 2020 by bobpan

Bob you like beer? I'll send you a beer.. what's the IQ fun... - Jul 09, 2020 by Tyler Robertson

I love beer...haha IQ is communication between the feeder a... - Jul 09, 2020 by bobpan

Tyler Robertson

#85176

Pinout for Quad CP30/CP40 Feeder connector | 8 July, 2020

Hello,

Trying to re-purpose a QUAD feeder for delivering small parts to a scada robot. Wondering if someone could help me out with a pinout for the connector. it's 8 pins Feeder is p/n 12/10-23959B SSA

Was able to get the board to power up and flash LEDs with 5V across two of the pins but I know the motor is 12V and I don't want to spoke this by poking around with 12V. Circuit is tough to trace, number of small traces and ICs.

PCB board labeled Samsung Aerospace with board number 60-23183 REv B

Any help appreciated thanks!!

reply »

bobpan

#85178

Pinout for Quad CP30/CP40 Feeder connector | 9 July, 2020

12vdc on top pin 5vdc on bottom pin ground on second pin up from bottom.

the rest are only needed for IQ function on Quad assembler.

Bob

reply »

Tyler Robertson

#85181