Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Underfill

Views: 2705

Hi, Anybody knew what is appropriate bump height for BGA tha... - Sep 09, 2020 by SMTA-64386317   via SMTA

BGA pitch 0.5?? ... - Sep 11, 2020 by Djo  

Could you just share with us those information : *BGA data... - Sep 12, 2020 by Djo  

Yes, 0.5 mm ... - Sep 25, 2020 by SMTA-64386317   via SMTA

Supplier would like to know the appropriate ball height to e... - Sep 25, 2020 by SMTA-64386317   via SMTA

I didn't understand your request.. Are you talking about und... - Sep 25, 2020 by Djo  

Yes, underfill process with dispensing. Customer require com... - Sep 25, 2020 by SMTA-64386317   via SMTA

I don't have a past expĂ©rience with underfill process , but ... - Sep 25, 2020 by Djo  

Thank you for sharing this info ... - Sep 26, 2020 by SMTA-64386317   via SMTA


SMTA-64386317

#85611

Underfill | 9 September, 2020

Hi, Anybody knew what is appropriate bump height for BGA that will be ideal for underfill process. The undefill must be strong enough to hold the component.

This message was posted via the Electronics Forum @ SMTASMTA

reply »


Djo

#85625

Underfill | 11 September, 2020

BGA pitch 0.5??

reply »


Djo

#85631

Underfill | 12 September, 2020

Could you just share with us those information :

*BGA datasheet ?? *Stencil design ?? *Stencil Thikness ?? *Type of under-film you want to work with : adhesive or self-adhesive ??

reply »


SMTA-64386317

#85687

Underfill | 25 September, 2020

Yes, 0.5 mm

This message was posted via the Electronics Forum @ SMTASMTA

reply »


SMTA-64386317

#85688

Underfill | 25 September, 2020

Supplier would like to know the appropriate ball height to ensure suit to SMT and underfill process. Undefill using epoxy.

This message was posted via the Electronics Forum @ SMTASMTA

reply »


Djo

#85689

Underfill | 25 September, 2020

I didn't understand your request.. Are you talking about underfill process (dispensing) or underfill with tape and reel packaging?? does the component drops at the 2nd reflow? that's why you want to go ahead for underfill process??

Thank you .

reply »


SMTA-64386317

#85690

Underfill | 25 September, 2020

Yes, underfill process with dispensing. Customer require component must withstand certain strength.

This message was posted via the Electronics Forum @ SMTASMTA

reply »


Djo

#85691

Underfill | 25 September, 2020

I don't have a past expérience with underfill process , but i can recom 2 track to follow in place of underfill dispensing: 1)Glue dispensing under bga ( complicated process ) 2)Tape and reel under-film ( reliable and controllable process ) ---> 2 process to increase the robustness of the bga against all constraints

reply »


SMTA-64386317

#85692

Underfill | 26 September, 2020

Thank you for sharing this info

This message was posted via the Electronics Forum @ SMTASMTA

reply »

Global manufacturing solutions provider
Flux-Free Reflow Soldering
Now Online
6
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Jetting Pump for Integration
best reflow oven
Sell Used SMT & Test Equipment

IPC Certification Training Schedule