Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Tin Platting Pad

Views: 3027

Hi All, There is a problem which tin platting pad not able t... - Sep 25, 2020 by SMTA-64386317   via SMTA

Print no paste on the tin-plated, [test???] pad. Experiment ... - Sep 26, 2020 by davef  

Hi Dave, Thank you. Will evaluate your method. ... - Sep 28, 2020 by SMTA-64386317   via SMTA


SMTA-64386317

#85685

Tin Platting Pad | 25 September, 2020

Hi All, There is a problem which tin platting pad not able to get good wetting after reflow process while OSP pad able to achieve good platting. Where should I look to improve wettability at tin platting finishing. There is no component mounting on it.

This message was posted via the Electronics Forum @ SMTASMTA

reply »


davef

#85693

Tin Platting Pad | 26 September, 2020

Print no paste on the tin-plated, [test???] pad. Experiment by putting Kapton tape over the stencil aperture for the tin platted pad.

Re-assess your reflow profile, since the liquidus of the two plating materials will be different.

Evaluate your paste storage and handling processes.

reply »


SMTA-64386317

#85694

Tin Platting Pad | 28 September, 2020

Hi Dave, Thank you. Will evaluate your method.

This message was posted via the Electronics Forum @ SMTASMTA

reply »

Facility Closure
Jetting Pump for Integration
Now Online
1
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

SMT & Related Equipment - Delta Tau Data Systems Inc.
Voidless Reflow Soldering
MSD Dry Cabinets

Global manufacturing solutions provider