Updating software for an MCS16B.

Subscribe to Thread

What is the command string used to download updated softwa... - Sep 22, 1999 by Eric Williams

| What is the command string used to download updated soft... - Sep 25, 1999 by

| | What is the command string used to download updated so... - Sep 28, 1999 by Eric Williams

| | | What is the command string used to download updated ... - Sep 28, 1999 by Eric Williams

Eric Williams

#9417

Updating software for an MCS16B. | 22 September, 1999

What is the command string used to download updated software from floppy discs to the mcs16b controller?

reply »

Steve E ( Fuji America )

#9418

Re: Updating software for an MCS16B. | 25 September, 1999

| What is the command string used to download updated software | from floppy discs to the mcs16b controller? | Well Eric it depends on what your doing. If your just updating the MCS software, start out at the first screen ( UCI screen ) Go to System Management on the left then install on the right, then enter.Feed it the disks. If you crashed the HD the you need the OS9 disks, and you need to boot off the first disk. reformat the HD. Anyway its like this...... Let me know if its MCS-1 or MCS-2 Then I'll e-mail you the process. Keep the Fuji faith. Steve E

reply »

Eric Williams

#9419

Re: Updating software for an MCS16B. | 28 September, 1999

| | What is the command string used to download updated software | | from floppy discs to the mcs16b controller? | | | Well Eric it depends on what your doing. If your just updating | the MCS software, start out at the first screen ( UCI screen ) | Go to System Management on the left then install on the right, then enter.Feed it the disks. If you crashed the HD the you need | the OS9 disks, and you need to boot off the first disk. reformat | the HD. Anyway its like this...... | Let me know if its MCS-1 or MCS-2 Then I'll e-mail you the | process. Keep the Fuji faith. Steve E | |

reply »

Eric Williams

#9420

Re: Updating software for an MCS16B. | 28 September, 1999

| | | What is the command string used to download updated software | | | from floppy discs to the mcs16b controller? | | | | | Well Eric it depends on what your doing. If your just updating | | the MCS software, start out at the first screen ( UCI screen ) | | Go to System Management on the left then install on the right, then enter.Feed it the disks. If you crashed the HD the you need | | the OS9 disks, and you need to boot off the first disk. reformat | | the HD. Anyway its like this...... | | Let me know if its MCS-1 or MCS-2 Then I'll e-mail you the | | process. Keep the Fuji faith. Steve E | |Steve, it's MCS1 format , all pdg, propers, and programs are backed up.The command string probably is entered when your in shell? Please let me know the format. Thanks. | | | |

reply »