IP3 keeps losing proper data?

Subscribe to Thread

Hi all, One of our Fuji IP3 (we have two) keeps losing the p... - Aug 23, 2021 by Rodrigo

I would start there. Swap MP boards between the 2 machines ... - Aug 24, 2021 by jdengler

I'm having same problem with one of my CP-642s. We checked ... - Aug 25, 2021 by smtUSA

Rodrigo

#86972

IP3 keeps losing proper data? | 23 August, 2021

Hi all, One of our Fuji IP3 (we have two) keeps losing the proper data (proper, status, programs) when off for a couple of days or so. I changed the battery on the MP board (its voltage looked fine: 3.6v) but that didn't fixed it. I notice a super capacitor that I had to change once in a QP??? board on the MP board of the IP3 so I changed it too but still nothing. The IP3 is still losing the data after a couple of days or so. There is another board (SCSI) with a battery that also looks fine (3.6v). Is this a bad MP board? Any help is appreciated. BTW the power to all the machines gets cut at night when we shutdown for the day until next morning. Thanks

reply »

jdengler

#86975

IP3 keeps losing proper data? | 24 August, 2021

I would start there. Swap MP boards between the 2 machines to see if the problem follows. If that doesn't change anything then try the SCSI board, you can continue until the problem moves to id the bad board.

reply »

smtUSA

#86982

IP3 keeps losing proper data? | 25 August, 2021

I'm having same problem with one of my CP-642s. We checked cards and now the monitors are not turning on.

reply »