Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji CP643

Views: 1521

#88043

Fuji CP643 | 2 June, 2022

Hi.

We have some problems with FCP643, the problem is when make a zero de axes CAM does not stop rotating and does not finish the zero and when rotating is makes it slow.

Has anyone had this problem?

Thanks.

reply »

#88045

Fuji CP643 | 2 June, 2022

I don't know the CP6's that well but on earlier CP's there is a flag that rotates with the CAM. That flag has 2 sensors that are used to get rough zero. Check that they are working correctly.

Jerry

reply »

#88046

Fuji CP643 | 2 June, 2022

Jerry thank.

I did check this but I going to change the sensor. Do you have CP643? This machine I have 2 years that not power on and lost the proper, do you have one copy?

Thanks.

reply »

#88047

Fuji CP643 | 3 June, 2022

Sorry no. Check the pocket on the door for the controller. Usually there is a printout of a proper for that machine. You can them type in the numbers. This would be better than a proper from another machine as it has the calibration of your machine in it. Hopefully it is a current one and not the original.

reply »

Benchtop Fluid Dispenser

Facility Closure