Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Can static built up on the surface of a reel be removed?

Views: 1315

#88119

Can static built up on the surface of a reel be removed? | 20 June, 2022

In case if static charge was built up on the surface of the component reel, it is possible remove static charge?

reply »

#88122

Can static built up on the surface of a reel be removed? | 21 June, 2022

With conductive elements, we reduce static build-up by connecting the item to the ground through a wrist strap, mat, or similar methods. With non-conducting items like paper or plastic, ionizers are used to reduce static build-up.

For more on ionizers look here: https://www.esda.org/standards/standards-working-groups/wg-3-0-ionization/

reply »

#88126

Can static built up on the surface of a reel be removed? | 21 June, 2022

Is your facility climate controlled? We had issues at low humidity.

reply »

#88127

Can static built up on the surface of a reel be removed? | 21 June, 2022

Offcourse, RH is between 47-50%. The cause of problem is that the one of the embossed carrier reels/package materials coming from supplier static charged. Material now is like insulating, not dissipative or conductive.

Example: https://drive.google.com/file/d/1A7NkbmmWezNX6mzAIbNR3bmhPIR-NYA8/view

Attachments:

reply »

Global manufacturing solutions provider

MSD Dry Cabinets