Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


0402 placement by IP2

Alex B.

#2165

0402 placement by IP2 | 15 December, 2000

i'm going to try placeing 0402 with a fuji IP2. Will i have any problems and are there any sugestions thanks in advance

Alex B

reply »

#2166

Re: 0402 placement by IP2 | 15 December, 2000

If it has the 54 mm camera, it works. But it just too slow & not efficiency. To increase your porductivity, you need a CP6 or 642 with 0802 feeders.

reply »

lucky

#2167

Re: 0402 placement by IP2 | 21 December, 2000

I do not think so. The 54 mm has a large field of view, so when it looks at small parts the image is blurry. What you want to try is using the other camera (camera 2) it has a 38mm field of view. Camera 2 is considered a narrow field of view, the camera 1 is a wide view. Do not waste your time use a cp machine.

reply »

Global manufacturing solutions provider

best reflow oven