Reballer fro BGA

Any recommendations for a reballer for BGA and mBGA? Low volume, low cost appreciated!

reply »

| Any recommendations for a reballer for BGA and mBGA? Low volume, low cost appreciated! | | David, check out Winslow Automation/Solderquik (408)526-1213 Jennie Tat

reply »

| Any recommendations for a reballer for BGA and mBGA? Low volume, low cost appreciated! | Dave: I don't believe that reballing BGAs that go into customer products is a good idea. Check with your BGA supplier to determine their recommended maximum thermal cycles. There are ample threads on this in the archives. Good luck. Dave F

reply »

| | Any recommendations for a reballer for BGA and mBGA? Low volume, low cost appreciated! | | | Dave: I don't believe that reballing BGAs that go into customer products is a good idea. Check with your BGA supplier to determine their recommended maximum thermal cycles. There are ample threads on this in the archives. Good luck. Dave F | I'd have to agree with Dave. All of my customers have given me new BGAs for replacement (even a $100 a crack), none have requested reballing or to reinstall a BGA that's already been installed once. Nor do I suggest that they do so just to save a few $'s.

An interesting thought, have you tried to use microstencils with solderpaste and reflow? I know of a gent down south of me who is doing it with success who does a fair amount of BGA rework...

Good Luck, Scott

reply »

| | | Any recommendations for a reballer for BGA and mBGA? Low volume, low cost appreciated! | | | | | Dave: I don't believe that reballing BGAs that go into customer products is a good idea. Check with your BGA supplier to determine their recommended maximum thermal cycles. There are ample threads on this in the archives. Good luck. Dave F | | | I'd have to agree with Dave. All of my customers have given me new BGAs for replacement (even a $100 a crack), none have requested reballing or to reinstall a BGA that's already been installed once. Nor do I suggest that they do so just to save a few $'s. | | An interesting thought, have you tried to use microstencils with solderpaste and reflow? I know of a gent down south of me who is doing it with success who does a fair amount of BGA rework... | | Good Luck, | Scott | | I have had some good results in reballing BGA's if you want you can give me a call and i'll go through it with you. Gary Miller Mini Micro Stencil 760.591.3804 |

reply »

| Any recommendations for a reballer for BGA and mBGA? Low volume, low cost appreciated! | | There is a large article in the current issue of Circuits Assembly magazine that says properly re-balled BGA's are perfectly fine. Also there is a re-balling service available. Check out their Web Page.

reply »

| Any recommendations for a reballer for BGA and mBGA? Low volume, low cost appreciated! | | Did you ever hear of WPRB1000 system from Weller ? Besides all other aspects of reballing I saw it worked quite simple and suits for low volume and I think it�s also low price.

Wolfgang

reply »