Solder Fillet Problem on 0603 chip capacitor

Subscribe to Thread

Any one have any experience on solder fillet problem on 060... - Oct 13, 2000 by yeo

If it�s in reflow, do you see where the solder is going? If... - Oct 13, 2000 by Wolfgang Busko

We periodically see chip caps with poor solderability. Oft... - Oct 13, 2000 by davef

Yeo, These are possible rootcause of that defect and you ... - Oct 17, 2000 by Philip A. Reyes

yeo

#2748

Solder Fillet Problem on 0603 chip capacitor | 13 October, 2000

Any one have any experience on solder fillet problem on 0603 chip capacitor ? The phenomenon is solder wetting on one terminal is very good and totally no solder wetting on the other terminal. The positing of capacitor is right at the centre of the pads without any shift. Could this due to mounting force or capacitor itself ? Please advise.

reply »

Wolfgang Busko

#2749

Re: Solder Fillet Problem on 0603 chip capacitor | 13 October, 2000

If it�s in reflow, do you see where the solder is going? If it�s in wavesoldering, how�s the orientation of the parts?

Wolfgang

reply »

davef

#2750

Re: Solder Fillet Problem on 0603 chip capacitor | 13 October, 2000

We periodically see chip caps with poor solderability. Often terminations are missing plating.

reply »

Philip A. Reyes

#2751

Re: Solder Fillet Problem on 0603 chip capacitor | 17 October, 2000

Yeo, These are possible rootcause of that defect and you can evaluate. 1. Orientation of the capacitor, maybe the cap is located behind big component. 2. Reflow profile, check the profile on that side. 3. Yes, check also the mounting force.

Philip

reply »