Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


QUAD 4-C

NAZEEH CHAUDRY

#16805

QUAD 4-C | 28 January, 1998

We are facing some placement problems with our QUAD 4-C. Program was running fine last week, Next week program will be off (placement, pickup,vision files etc, Any help, any idea,??? Thanks

reply »

Scott

#16809

Re: QUAD 4-C | 29 January, 1998

| We are facing some placement problems with | our QUAD 4-C. | Program was running fine last week, Next week | program will be off (placement, pickup,vision files | etc, | Any help, any idea,??? | Thanks I had the same problem on a trio of Quads at my last job. Couldn't find a solution. Changed jobs and bought a Mydata -- problem solved. Good luck! Scott

reply »

Rin Or

#16808

Re: QUAD 4-C | 30 January, 1998

| We are facing some placement problems with | our QUAD 4-C. | Program was running fine last week, Next week | program will be off (placement, pickup,vision files | etc, | Any help, any idea,??? | Thanks This could cause by the xy table clamping.May be it not tight enough to hold the pcb down while the xy table move.I have same problem with my 2 Mydata machines. Rin

reply »

Robert

#16806

Re: QUAD 4-C | 24 February, 1998

| We are facing some placement problems with | our QUAD 4-C. | Program was running fine last week, Next week | program will be off (placement, pickup,vision files | etc, | Any help, any idea,??? | Thanks Sorry your having trouble, I also have a IVc that I have struggled with from time to time. I have stablized yours, but it wasn't over night. The problems I have found were many, including the cleanliness of the glass scales and encoders. I really have too many questions to list in this forum to give you any effective solutions. Please contact me if your problems persist. Phone 541-683-5701 ext. 1056, Robert.

reply »

Ray

#16807

Re: QUAD 4-C | 28 February, 1998

| | We are facing some placement problems with | | our QUAD 4-C. | | Program was running fine last week, Next week | | program will be off (placement, pickup,vision files | | etc, | | Any help, any idea,??? | | Thanks Glass scales ARE the problem. There's other equipment that utilize other methods of feedback to a closed-loop system that is much more dependable...Sony Magna-scales is a much more robust system to provide the kind of accuracy that is stable, and dependable. Ray | Sorry your having trouble, I also have a IVc that I have struggled with from time to time. | I have stablized yours, but it wasn't over night. The problems I have found were many, including the cleanliness of the glass scales and encoders. | I really have too many questions to list in this forum to give you any effective solutions. Please contact me if your problems persist. | Phone 541-683-5701 ext. 1056, Robert.

reply »

MSD Dry Cabinets

Reflow Oven