Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

PCB finish requirement for COB process

For the COB process, what thickness for plating Au is suitab... - Sep 24, 2002 by andy  

we used the ball bonding, just normal chip on board. as I... - Sep 24, 2002 by andy  

I spec COB using wire bond attach - 0.75um � 0.25 Gold over ... - Sep 27, 2002 by POC  

Mar, The previous post makes the best point. Your finish... - Sep 27, 2002 by davef  

andy

#21737

PCB finish requirement for COB process | 24 September, 2002

For the COB process, what thickness for plating Au is suitable? IS there any specification for this issue?

reply »

andy

#21738

PCB finish requirement for COB process | 24 September, 2002

we used the ball bonding, just normal chip on board.

as I know the the electroless Ni/immersion Au, the gold thickness is about 0.13um at most, what about chemical plating or electrolytic plating?

any experience on it, thanks

reply »

POC

#21778

PCB finish requirement for COB process | 27 September, 2002

I spec COB using wire bond attach - 0.75um � 0.25 Gold over 5um � 3 Nickle.

reply »


davef

#21780

PCB finish requirement for COB process | 27 September, 2002

Mar,

The previous post makes the best point. Your finish spec depends on the COB process you plan to use. Is your process: * Gold wire bond * Aluminum wire bond * Flip chip * Er, watt

reply »

IPC Certification Training Schedule
consignment program
Now Online
11
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Benchtop Fluid Dispenser
Jetting Pump for Integration
SMT & Related Equipment - Delta Tau Data Systems Inc.

IPC Training & Certification - Blackfox