Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Coplanarity specs

I need some information about coplanarity specs for QFP's. I... - Oct 24, 2003 by

We usually matched the value with the thickness of the paste... - Oct 24, 2003 by Stefan Witte  

Refer to your components' drawings to check for this data. ... - Oct 24, 2003 by Arturo  

JEDEC Standards allows max 4 mils lead coplanarity Gabe ... - Oct 25, 2003 by via

albertoh

#26160

Coplanarity specs | 24 October, 2003

I need some information about coplanarity specs for QFP's. I try to setup coplanarity inspection on my QP242 but i'm not sure about what value i need on each parameter in order to setup my diferents parts data for this option. Thanks in advance.

reply »


Stefan Witte

#26161

Coplanarity specs | 24 October, 2003

We usually matched the value with the thickness of the paste or stencil. If the lead doesn�t dip into the paste it will not be soldered.

reply »

Arturo

#26164

Coplanarity specs | 24 October, 2003

Refer to your components' drawings to check for this data.

reply »

Gabriele

#26171

Coplanarity specs | 25 October, 2003

JEDEC Standards allows max 4 mils lead coplanarity

Gabe

This message was posted via the Electronics Forum @

reply »

best reflow oven
IPC Certification Training Schedule
Now Online
6
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

SMT Reflow Soldering Oven
MSD Dry Cabinets
SMT Reflow Ovens

Facility Closure