Hollis PT500 system software Q.

Hi lads, Can anyone tell me a bit about PT500 application software? I recently had to replace the Hard drive in the host PC for our wave. I re-loaded the system software and re-configured. One thing I noticed however is in the "Calibrate T/C's" option, there was a -20 deg offset in the "solder temp", and I dont know if this was there previous to reloading the software. I checked my solder temp with a handheld temp unit and verified there was a 20deg delta in the displayed actual temp. I want to know if this setting is located on the system software (as found in the hard drive) or does it exist in an EPROM on the motherboard?

Thanks,

Kev

reply »