Device to create a reflow/wave profile

Subscribe to Thread

Hi, actually, I'm searching for a device to create reflow... - Mar 21, 2005 by ING

Search the fine SMTnet Archives while you're waiting for oth... - Mar 21, 2005 by davef

Hi, We used to manually profile by comparing logged temp ... - Mar 22, 2005 by

I used KIC before now I'm using MOLE. I recommend KIC. ... - Mar 24, 2005 by

ING

#33326

Device to create a reflow/wave profile | 21 March, 2005

Hi,

actually, I'm searching for a device to create reflow profiles like DATAPAQ, KIC, MOLE.... because our only one unit is broken...

Which one are you using and why? Do you know if someone have a second hand unit to sell?

reply »

davef

#33333

Device to create a reflow/wave profile | 21 March, 2005

Search the fine SMTnet Archives while you're waiting for others to respond.

reply »

Grant

#33346

Device to create a reflow/wave profile | 22 March, 2005

Hi,

We used to manually profile by comparing logged temp numbers and matching the paste profile. But we got a KIC and it's software was so much better we got a good reduction in rework and we have almost no first run faults now. I would recommend one as the software is great, and tells you suggested zone temps to make the profile fit the paste profile. We also purchased that software that runs profile simulations and recommends the best temps.

It's absolutely incredible software, and that's what makes the difference. Other than that, it's just a simple data logger. But the software is the important part. I would evaluate that first.

Regards,

Grant

reply »

Dreamsniper

#33378

Device to create a reflow/wave profile | 24 March, 2005

I used KIC before now I'm using MOLE. I recommend KIC.

regards,

reply »