Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji NXT

Views: 3176

#39468

Fuji NXT | 2 February, 2006

I would like to start a new post regarding fuji NXT machine. What do you think about the machine as far as the servicing of the machine goes. I am so used to the older machines such as : CP,IP, and QP. Those machines at least give you some indication of problem discription. But NXT, you have to use the accessory software to decipher the problem discription. Feel free to expree your thoughts.

reply »

#39475

Fuji NXT | 2 February, 2006

Watch out for the large board trick. You have to turn the board 90 degrees to run it.

reply »

#39491

Fuji NXT | 2 February, 2006

Hi,

I think you can run the wide modules if you need to run large boards. However we went for a bunch of XP machines instead of NXT, because we can use IP and CP feeders, plus we get 100 feeder slots per XP-143, where each module of NXT has less. But NXT changes over faster, and takes less space.

Regards,

Grant

reply »

____

#39492

Fuji NXT | 2 February, 2006

> I would like to start a new post regarding fuji > NXT machine. What do you think about the machine > as far as the servicing of the machine goes. I am > so used to the older machines such as : CP,IP, > and QP. Those machines at least give you some > indication of problem discription. But NXT, you > have to use the accessory software to decipher > the problem discription. Feel free to expree > your thoughts.

If your in the area, booth #1001 at the APEX show. You will see the different confiurations the NXT platform has to offer. The screen tells you almost exactly whats wrong when an issue occurs. The Accessory software is used to view the error code and then fix the issue if applicable. Go there, learn. XP series will also be there. Great machine also.

reply »

#39496

Fuji NXT | 3 February, 2006

Who are you ? Please provide me with your name and I surely will remember to look for you. Maybe I then can pass that information back to fuji training department.

reply »

Global manufacturing solutions provider

best reflow oven