Nozzle Cleaning Machine

NC32-A2

Inquiry Now > This Auto cleaning machine with automatically cleaning and drying function, can clean 32pcs nozzle one time, Use industrial waterUtilize the pulse of water, no damage to the suction nozzle, no pollution to the environment。

SMT Nozzle Cleaning machine

NC32

Can clean 32pcs nozzles simultaneously

In the field of the semiconductor industry today, with the development of SMT, small parts into small, high-density mounting and base for reality, and future development trends will be further component miniaturization. Since the chip mount, solder flux contamination adsorption nozzle as a result of the frequent failure to produce a great deal of influence, has become an urgent problem to be solved.

Fine mist particles
shredding continuous pressurized water, produce about 3-10um mist particles, so that it can clean the tiny nozzle aperture wall dirt.

Auto nozzle cleaning machine QXJ-NC32 uses pulse cleaning methods may be the inner wall of the nozzle in a short time, before removing the dirt can not be removed, using a non-toxic industrial pure water (PH value 5-7 softener), when cleaning without damaging the nozzle.

Pulsed-field kinetic energy
Sonic (V = 360m / s) to create a strong impulse to the kinetic energy of the jet nozzle, the nozzle to be cleaned top to form a continuous energy field, crushing surface and inside dirt, achieve the purpose of cleaning.

Centralized gas emissions

Pure water filtration Multilayer

High stability

Low noise

NC32 compared with traditional methods

	QXJ-NC32	Ultrasonic cleaning	Inject + Blowing	Needle poke
Cleaning effect	◎	△	△	△
Cleaning fluid	Industrial pure water	Chemical solvents	Chemical solvents	-
Gas	No have	Have	Have	-
Operating environment	◎	X	X	X
Environmental measures	◎	X	X	◎
Small Nozzle	◎	X	X	X
Nozzle Painted	Protect	-	△	△
Nozzle Reflector	Protect	-	△	△
QR Code	Protect	-	△	△
Cleaning Quality	◎	△	X	X

Powerful cleaning method

In the mounting process, the nozzle particularly vulnerable to dirt and adhesion of solder paste and so on. Long do maintenance, cleaning or maintenance is not complete, the paste will harden and dirt, increasing the difficulty of cleaning, even after a long time the cumulative result blocked, resulting in scrap.

In practice proves, QXJ-NC32 machine effective response stubborn dirt, and the complex structure of the nozzle thoroughly cleaned.

Specifications

Size	540 ×570 ×530	Nozzle tip size	0201-2125
Weight	62KG	Tray size	32 pcs Nozzle
Air pressure	0.5-0.6Mpa	Efficiency	400 pcs/H
Air consumption	Below 280 NL/ min	Voltage	AC:110-220V
Fluid	Industrial pure water	Power	150W
Water tank capacity	1.5L	Wastewater collection	Centralized collection of outlet
Display function	Touch screen, digital pressure gauge pointer pressure gauge	Interface login	Administrator password login
Liquid level detection	high and low level alarm	Alarm mode	Audible and visual alarm, interface prompt