(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
Materials |
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
Materials |
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
Materials |
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
Materials |
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
Materials |
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
Materials |
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
|
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
|
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
Materials |
(seamless and welded) pipe fittings (elbows, reducers, tees, bends, stubs) for different applications.
Typical Stock Size Range* (size range might differ based on material grade):3/8“ — 24”(17.15mm — 609.6mm )
*Larger sizes and project specific dimensio...
|
Materials |
Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy&rsquo...
|
Other |
Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1...
|
Other |
Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1...
|
Other |
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties...
|
Other |
Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like g...
|
Other |
Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It h...
|
Other |
Alloy 20, also known as Carpenter 20, is a nickel-iron-chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulfuric acid. This superalloy has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing ch...
|
Other |
S32750 Tubing/Piping Super Duplex UNS S32750 combines the most desirable characteristics of both ferritic and austenitic steels. It has excellent corrosion resistance to a wide variety of media, with outstanding resistance to pitting and crevice corrosion in seawater and other chloride containing...
|
Other |
S32205 Tubing/Piping Duplex S32205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steel. “Duplex” describes a family of stainless steel that are neither fully austenitic, like 304 stainless...
|
Other |
S31803 Tubing Alloy S31803 is a 22% chromium, 3% molybdenum, 5-6% nickel, nitrogen alloyed duplex stainless steel with high general, localized, and stress corrosion resistance properties in addition to high strength and excellent impact toughness. Alloy S31803 provides pitting ...
|
Other |
Duplex 2205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purel...
|
Other |
Alloy 904L is an austenitic stainless steel intended for use under severe corrosion conditions, with a very good resistance to attacks in acidic environment, as sulphuric, phosphoric and acetic acid. Very good resistance to pitting corrosion, stress corrosion cracking and a much better resistance...
|
Other |
Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance. Alloy 2507 has 25% chromium, 4% molybdenum, and 7% nickel. This high molybdenum, chromium and nitrogen content results in excellent resistance to chloride ...
|
Other |
01. Process method: cold drawn/cold pilger.
02. Surface finish: annealed/ cold pilger.
03. Material: S31803,304,304L,310/S,
04. Standards: ASTM A213/213M (ASME SA213/SA213M), ASTM A312/312M (ASME SA312/SA312M), ASTM A789/789M (ASME SA789/SA789M), ASTM A790/790M (ASME SA790...
|
Other |
01. Commodity: Welded austenitic stainless steel pipes
02. Surface finish: annealed, Polish, Brush, etc.
03. Material: 310S
04. Standards: JIS, DIN, GB, BS, ASTM(ASME), ETC.
05. Size: (ansi/asme size as under, other standards of size is for re...
|
Other |
01. Process method: cold drawn/cold pilger.
02. Surface finish: annealed/ cold pilger.
03. Material: S31803,304,304L,310/S,316/316L/316Ti DUAL GRADE, 317L,321,347
04. Standards: ASTM A213/213M (ASME SA213/SA213M), ASTM A312/312M (ASME SA312/SA312M), ASTM A789/789M (ASME SA789...
|
Other |
01. Process method: cold drawn/cold pilger.
02. Surface finish: annealed/ cold pilger.
03. Material: S31803,304,304L,310/S,316/316L/316Ti DUAL GRADE, 317L,321,347
04. Standards: ASTM A213/213M (ASME SA213/SA213M), ASTM A312/312M (ASME SA312/SA312M), ASTM A789/789M (ASME SA789...
|
Other |
01. Process method: cold drawn/cold pilger.
02. Surface finish: annealed/ cold pilger.
03. Material: S31803,304,304L,
04. Standards: ASTM A213/213M (ASME SA213/SA213M), ASTM A312/312M (ASME SA312/SA312M), ASTM A789/789M (ASME SA789/SA789M), ASTM A790/790M (ASME SA790/SA790...
|
Other |
01. Commodity: Welded austenitic stainless steel pipes
02. Surface finish: annealed, Polish, Brush, etc.
03. Material: 201,202,304,304L,316/316L, 317L,309S,430 with GB, ANSI, EN, JIS,
BS & ISO materials designations
04. Standards...
|
Other |
01. Process method: cold drawn/cold pilger.
02. Surface finish: annealed/ cold pilger.
03. Material: 316/316L
04. Standards: ASTM A213/213M (ASME SA213/SA213M), ASTM A312/312M (ASME SA312/SA312M), ASTM A789/789M (ASME SA789/SA789M), ASTM A790/790M (ASME SA790/SA790M), DIN ...
|
Other |
01. Process method: cold drawn/cold pilger.
02. Surface finish: annealed/ cold pilger.
03. Material: 316/316L
04. Standards: ASTM A213/213M (ASME SA213/SA213M), ASTM A312/312M (ASME SA312/SA312M), ASTM A789/789M (ASME SA789/SA789M), ASTM A790/790M (ASME SA790/SA790M), DIN ...
|
Other |
01. Process method: cold drawn/cold pilger.
02. Surface finish: annealed/ cold pilger.
03. Material: S31803,304,304L,310/S,316/316L/316Ti DUAL GRADE, 317L,321,347
04. Standards: ASTM A213/213M (ASME SA213/SA213M), ASTM A312/312M (ASME SA312/SA312M), ASTM A789/789M (ASME SA789/SA...
|
Materials |