The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
Curie Heat Technology operating at 470KHz.
|
Rework & Repair Equipment |
The TMT-5000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
Curie Heat Technology operating at 13.56MHz.<...
|
Rework & Repair Equipment |
The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
High thermal recovery & performance....
|
Rework & Repair Equipment |
The Thermaltronics Robotic System incorporates innovative design concepts and precision components to ensure accuracy. The combination of high precision hardware and intelligent software ensures precision soldering and low operator training costs.
Dual Arm, Six Axis Soldering Ro...
|
Soldering Robots |
Thermaltronics AF-KIT auto solder feeder kit provides for single handed operation during soldering applications. The kit is provided as an accessory to existing Thermaltronics hand soldering tools.
Adjustable speed, feed length
Adjustable feed retraction
Us...
|
Rework & Repair Equipment |
The TMT-HA050 hot air tool can be used for the removal of surface mount components such as SOIC, QFP, PLCC and other similar devices.
The Thermaltronics TMT-HA050 hot air tool is a portable and flexible hot air rework system. The Thermaltronics TMT-HA200 Hot Air ...
|
Rework & Repair Equipment |
The TMT-HA100 hot air pencil is designed to remove and reflow small precision components, integrated circuits and other smaller devices.
The Thermaltronics TMT-HA100 hot air pencil is a portable and flexible hot air rework system. The Thermaltronics TMT-HA100 hot air&nb...
|
Rework & Repair Equipment |
The TMT-HA200 hot air tool can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others.
The Thermaltronics TMT-HA200 Hot Air Tool is a portable and flexible hot air rework system. The Thermaltronics TMT-HA200 Hot Air Tool allo...
|
Rework & Repair Equipment |
The TMT-HA300 hot air tool uses a large diaphragm pump and can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others.
The Thermaltronics TMT-HA300 Hot Air Tool is a portable and flexible hot air rework system. The Thermaltro...
|
Rework & Repair Equipment |
The TMT-HA600 is suitable for the more difficult applications in the removal and reflow of surface mount components.
The TMT-HA600 hot air tool uses a large diaphragm pump and a high power 1300W heater, designed to work on more difficult applications, in the removal and reflow of surf...
|
Rework & Repair Equipment |
The TMT-ASTC automatic solder tip cleaner helps rework badly oxidized tips. Two high quality brass brushes, which revolve in opposite directions, aid in the removal of oxidisation from the soldering tip.
Removes tip oxidation
Light & compact, takes up minimal benc...
|
Rework & Repair Equipment |
The TMT-ST10 is a three-in-one tip tester, providing tip temperature measurement, tip to ground resistance and tip to ground AC voltage leakage.Test data can be easily saved to memory and exported for data analysis.
Data save and export
Lightweight and easy to use
|
Rework & Repair Equipment |
The TMT-PH200 uses sensor control feedback loop to control the infrared preheater temperature and is suitable for leaded and lead-free preheating processes.
The Thermaltronics TMT-PH200 IR Preheater offers totally controllable and stable temperatures from 100°C – 380 °C....
|
Rework & Repair Equipment |
The TMT-PH300 uses advanced intelligent temperature control technology to control the infrared preheater. Three heating modes allow the unit to handle leaded & lead-free preheating processes and are suitable for use with PCB containing BGA and SMD components.
Microprocessor ...
|
Rework & Repair Equipment |
The Thermaltronics TMT-PH300 IR Preheater offers totally controllable and stable temperatures from 50°C – 400 °C. The Thermaltronics TMT-PH300 Infra red (IR) Preheater is ideally used in rework applications where background heat is required for the PCB. The use of IR heat elim...
|
Rework & Repair Equipment |
The Thermaltronics TMT-FE100S fume extraction unit, takes up minimal benchtop space but is inclusive of a prefilter and a separate HEPA filter, to ensure operator safety. Fan speed can also be adjusted, based on the proximity of the soldering operation or the amount of fumes being generated.
...
|
Fume Extraction |
The TMT-TC-2 Tip Tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station.
Removes tip oxidation
No-Clean compatible f...
|
Rework & Repair Equipment |