WS716 Water Soluble Liquid Flux for Wave Solder Applications
Company Information:
Name: |
WS716 Water Soluble Liquid Flux for Wave Solder Applications |
Category: |
|
Offered by: |
|
WS716 Water Soluble Liquid Flux for Wave Solder Applications Description:
WS-716 is a halide-free, alcohol based, organically activated, rosin-free, water soluble liquid flux designed specifically for wave solder applications.
WS716 is the liquid version of the WS-477S1 series solder paste. Though designed for application via foam fluxer, WS716 may also be applied by automated flux sprayers, dipped, or brushed on with favorable results. WS716 is a buffered flux with a wide activation range and exceptional wetting characteristics that produce bright shiny solder joints. WS716 performs well with bare copper, solder coated, and organic coated pwbs. Since WS716 flux is still active post-processing, all residues must be removed after soldering.
Features:
- Halide-Free
- Rosin-Free
- Phosphate-Free
- Same Chemistry as WS477S1 Paste
- Can Be Foamed, Sprayed, Brushed, or Dipped
- Excellent Wetting
- Wide Process Window
- Enhanced Activity Level
- Foam Resistant Residues
Application:
- WS716 is formulated for application via foam, but may be sprayed, brushed or dipped as well. Flux pots should be plastic or titanium.
- For spraying, WS716 is ready to use directly from its container, no thinning is required. When spray fluxing, it is imperative that proper flux coverage and uniformity be achieved and maintained. A dry flux coating of 500 to 1500 micrograms per square inch is recommended as a starting point.
- When foaming, air stones should be supplied with compressed air, free of oil and moisture. Adjust foam head to achieve a uniform distribution of small bubbles for optimum flux coverage.
- During foaming applications it is periodically necessary to add AIM’s Common Flux Thinner to replace that which is lost through evaporation.
Cleaning:
WS716 can be cleaned in normal tap water; however, deionized water is recommended for the final rinse. A temperature of 38°C - 65°C (100°F - 150°F) is sufficient for removing any residues and will produce MIL-F-28809 ionic cleanliness levels. An in-line or other pressurized spray cleaning system is suggested, but is not required.
Handling:
- WS716 has an unopened shelf life of 1 year when stored at room temperature.
- Do not store near fire or flame. Keep away from sunlight as it may degrade product.
- WS716 is shipped ready-to-use, no mixing necessary.
- Do not mix used and unused chemical in the same container. Reseal any opened containers.
Safety:
- Use with adequate ventilation and proper personal protective equipment.
- Refer to the accompanying Material Safety Data Sheet for any specific emergency information.
- Do not dispose of any hazardous materials in non-approved containers.
WS716 Water Soluble Liquid Flux for Wave Solder Applications was added in Feb 2011
WS716 Water Soluble Liquid Flux for Wave Solder Applications has been viewed 428 times
20 More Products from AIM Solder :