Mycronic Technologies AB
Mycronic, formerly MYDATA, is the key manufacturer of assembly machine for electronics. Our product portfolio contains Pick&Place machines, Jet-printing machines and component storage towers.
Leading supplier of production solutions to the electronics industry
Mycronic is a Swedish high-tech company engaged in the development, manufacture and marketing of production solutions to the electronics industry. Mycronic is listed on NASDAQ OMX, Stockholm, Small Cap.
The company has:
- two business areas: Pattern Generators, including mask writers and direct writers, LDI and Surface Mount Technology equipment including pick&place and jet printing solutions
- strong local presence close to customers
- 524 employees, of which 306 in Sweden
Mycronic Technologies AB Postings
13 products »
Mydata MY600 High-Speed SMT Jet Printer
MY600 - Millions of dots ahead of its time. The next-generation MY600 Jet Printer now enables SMT producers to achieve optimal solder joints on complex boards at speeds of more than one million dots per hour, a 50% increase in throughp...
Ergonomic workstation for PCB inspection and manual assembly Board stop function, board release Arm rests and earth strap connection Board thickness down to 0.4 mm Motorized wid...
PCB turn unit for L, T or X configuration Board routing through L-bend, T-junction or crossover Precision controlled DC motors Solid welded steel frame construction Light tower...
Mydata Bi-directional PCB Inverter
Bi-directional board inverter Programmable board flow sequence Pass-through function Bi-directional Light tower as status indicator The Board Inverter turns t...
Telescopic gate with "handsfree" operation. Fully automated, "handsfree" 700 mm opening DC-motor controlled telescopic movement The telescopic gate conve...
Buffer unit for equipment load balancing The buffer unit is designed to balance station capacity differences and offer board escape possibilities in case of failures of the connected systems. The FIFO/LIFO capability and the abilit...
Mydata Automatic PCB Magazine Loader
The loader separates and loads bare or pre-mounted PCBs from rasterized magazines onto a subsequent production line. The automatic loader holds up to 3 magazines simultaneously. The filling ratio, skip factor, and first and last load...
The destacker separates single boards from the bottom of the stack and transports them one by one onto the production line. If the unit becomes empty, or the destacking switch is turned off, the conveyor starts to work as a regular transport co...
Board train conveyors for higher throughput Increases overall throughput Automatic grouping of several PCBs Improves board transfer times Reduced number of nozzle changes...
Automated & MSD compliant storage. The MYDATA SMD Tower provides more intelligent and automatic access to component reels and trays. The MYDATA SMD Tower boosts production efficiency with:...
5 technical articles »
Robust Reliability Testing For Drop-on-Demand Jet Printing
Mar 19, 2020 | Gustaf Mårtensson, Patrik Mirzai
In this study, the question was how to perform statistically reliable robust- ness tests for the non-contact drop-on-demand printing of functional fluids, such as solder paste and conductive adhesives. The goal of this study was to develop a general method for hypothesis testing when robustness tests are performed. The main problem was to determine if there was a statistical difference between two means or proportions of jet printing devices. In this study, an example of jetting quality variation was used when comparing two jet printing ejector types that differ slightly in design. We wanted to understand if the difference in ejector design can impact jetting quality by performing robustness tests. and thus answer the question, "Can jetting differences be seen between ejector design 1 and design 2"?...
Jetting of Isotropic Conductive Adhesives with Silver Coated Polymer Particles
Dec 26, 2018 | Gustaf Mårtensson
The development of novel interconnection materials for production of electronics is of considerable interest to fulfill increasing demands on interconnect reliability in increasingly demanding environments with respect to temperature extremes, mechanical stresses and/or production limitations. Adhesives are playing an increasingly significant role in the continuously evolving electronics industry. (...)
Specific applications will be presented that highlight the feasibility of the technology with respect to conductivity, structural reliability and lifetime standards. The deposition of the novel ICA has been performed using a jet printing technology to ensure both precise and accurate positioning, size and volume delivery....
Jetting Strategies for mBGAs a question of give and take...
Apr 02, 2015 | Gustaf Mårtensson; BioNano Systems Laboratory, MC2, Petter Svensson, Thomas Kurian; Micronic Mydata AB
The demands on volume delivery and positioning accuracy for solder paste deposits are increasing as the size and complexity of circuits continue to develop in the electronics industry. According to the iNEMI 2013 placement accuracy for these kinds of components will reach 6 sigma placement accuracy in X and Y of 30 um by 2023.
This study attempts to understand the dependencies on piezo actuation pulse profile on jetting deposit quality, especially focused on positioning, satellites and shape. The correlation of deposit diameter and positioning deviation as a function of piezo actuation profile shows that positioning error for deposits increase almost monotonically with decreasing droplet volume irrespective of the piezo-actuation profile. The trends for shape and satellite levels are not as clear and demand further study. ...
Tackling SMT Enemy Number One - Raising The Standard of Solder Paste Application
May 14, 2009 | MYDATA automation
Is screen printing technology able to keep pace with rising quality demands and increasingly complex board layouts? Or, is new jet printing technology ready to fill the gap? A comparison study between the two methods reveals some interesting differences. Screen printers offer some possibilities for optimizing solder paste deposits, but optimization is far easier and quicker with the jet printer. At the same time, the ability to print individualized deposits on every single pcb pad may be the ultimate answer to the growing quality challenge....
Startling Results From Reliability Testing
Mar 13, 2009 | Lars Wallin, Project Manager Live Production Events at EP shows at the Stockholm Fair IPC European Representative.
Open product reliability testing in Stockholm, Sweden in January as part of a live production event generated some quite startling results. It was apparent that many components simply cannot handle the high reflow temperatures of a lead-free soldering process, and that many surface-mount machine suppliers are battling significant problems with QFN packages and other components that are mounting edgeways (bill boarding). However, some suppliers have achieved good results....
70 news releases »
Jan 29, 2022 | As a leading global partner for integrated PCB assembly solutions, Mycronic will continue to demonstrate the benefits of the flexible factory at IPC APEX EXPO in San Diego, January 25-27, 2022. In addition to the latest in integrated SMT assembly solutions, advanced jet printing technology, dispensing and material handling solutions, the company will highlight recent advances in 3D inspection technologies, process analysis tools and process control software.
Nov 17, 2021 | Entering the market in 2017, and now the world's second-largest supplier of integrated coating and dispensing solutions for the electronics industry, Mycronic AB (publ) continues to expand its global offering at Productronica in Munich, November 16-19, 2021. In addition to a versatile new modular conformal coating, inspection and curing line, the company will also demonstrate the world's fastest all-material jetting system, the latest industrial dispensing technologies as well as a range of advanced on- and off-line process control software solutions.
Mycronic accelerates inspection programming with new MYPro I series 3D AOI system
Nov 12, 2021 | Mycronic AB (publ) will showcase its next-generation 3D Automated Optical Inspection system at Productronica in Munich, November 16-19, 2021. The new MYPro I series 3D AOI builds on the success of the industry-leading K series 3D AOI, offering fully redesigned ergonomics as well as powerful new programming tools that further reduce programming time by up to thirty percent.
Mycronic to showcase enhanced process control solutions for flexible PCB assembly at Productronica
Oct 07, 2021 | Mycronic will continue to demonstrate the benefits of the flexible factory at Productronica in Munich, November 16-19, 2021. In addition to the latest integrated SMT line, along with advanced jet printing, dispensing and material handling solutions, the company will highlight recent advances in 3D inspection technologies, process analysis tools and process control software.
Mycronic US operations combined in new state-of-the-art facility near Boston
Jul 14, 2020 | Mycronic US is pleased to announce that all of its operations have been successfully integrated into a new state-of-the-art, 102,000 square-foot facility in Tewksbury, near Boston, Massachusetts. This brings together under one roof the Global Technologies division comprising of MRSI Systems and AEi and the US operations of Mycronic's High Flex division.
Mycronic and Optomec to exhibit new fine feature electronics material dispensing system at APEX
Mar 05, 2018 | Mycronic AB (publ), will together with Optomec Inc. exhibit a newly co-developed micro dispensing platform for electronics materials at IPC APEX EXPO in San Diego, February 27 - March 1, 2018.
Mycronic and Optomec to exhibit new fine feature electronics material dispensing system at APEX
Feb 27, 2018 | Mycronic AB will together with Optomec Inc. exhibit a newly co-developed micro dispensing platform for electronics materials at IPC APEX EXPO 2018. Technology trends are creating new challenges where material deposition must not only be precise but also be dispensed at micrometer scale geometries. Leveraging Optomec’s unique, high-resolution Aerosol Jet technology onto Mycronic’s MYSmart precise dispensing platform creates a production-viable solution for micro dispensing and printed electronics.
Mycronic and Aegis renew partnership – FactoryLogix software to be embedded with MY700
Nov 17, 2017 | The global SMT solutions provider Mycronic will, through a renewed partnership agreement, include Aegis Software’s FactoryLogix NPI (New Product Introduction) as the main programming interface for its MY700 Jet Printer and Jet Dispenser. The tailor-made software, branded as FactoryLogix Express, will also have the capability to prepare data for Mycronic’s range of pick-and-place machines, through an optional TPSys output interface.
Mycronic acquires Shenzhen Axxon Automation Co.,Ltd
Aug 01, 2016 | Mycronic AB (publ), has signed an agreement to acquire 75 percent of Shenzhen Axxon Automation Co.,Ltd (Axxon) for a cash consideration of approximately SEK 430 million. The acquisition will be financed through own funds. As part of the agreement Mycronic will acquire the remaining shares of the company in two steps – an additional 5 percent will be acquired within this year and the last 20 percent after three years. The purchase price for the last part after three years will be set based on parameters such as growth and earnings, which may include changes compared to the current valuation.
Mycronic receives order for an advanced Prexision-80 mask writer
Jul 01, 2016 | Mycronic AB (publ), has received an order for a Prexision-80 (P-80) mask writer for advanced display applications from a customer in Asia. The system is scheduled to be delivered around year-end 2017.
