Precision Auger Pump
Precision Auger Pump
Precision Auger Pump Description:
Precision Auger Pump Cleaning - Easy
New Advanced Precision Auger Pump - Single Pump Solution
The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equipped with a high resolution precision encoder. The enhanced pump configuration is compatible with a full range of wear resistant carbide augers - high volume 186, mid volume 105, and the new, very low volume 062 auger - all with a single pump. Using the 062 diameter auger, we can repeatedly dispense solder paste for 01005 components.
The Precision Auger pump interfaces with our closed-loop Real Time Process Control system (FPC) to offer consistent fluid feed to the auger/cartridge assembly - it's not dependent on the liquid in the reservoir. FPC interfaces with 5 cc to 55 cc fluid reservoirs. Larger reservoirs, like 6 oz, can be used with a high volume adapter. When using larger reservoirs, the Real Time Process Control significantly enhances repeatability regardless of fluid level in the reservoir.
For high level dispensing accuracy, use the closed loop encoder to program the speed of the pump and the number of counts for a specific dot. Using the encoder ensures repeatable operation and uniform speed when the fluid viscosity changes. A body heater is available to assist in stabilizing fluid viscosity.
The Precision Auger Pump is an excellent selection for the high mix environment and its continually changing process requirements. The ability to change the pump from high volume to low volume applications by merely swapping the internal auger/cartridge assembly gives you the benefit of multiple pumps at an overall lower cost.
Any auger/cartridge configuration can be inserted into the main Precision Auger Body without modification. This means a single pump can process a wide range of applications. Many aspects of the Precision Auger pump are programmable including acceleration, deceleration, speed, and in the case of dots, the number of counts for the dispensing.
Real Time Process Control -FPC
When dispensing fluids, there is always a question about the consistency of the fluid delivered to the pump. Different fluid materials, batches, and levels in the syringe or reservoir can affect flow when fluid is fed from a syringe.
Fluid Pressure Control (FPC) is a breakthrough in uniform fluid dispensing. FPC ensures a constant supply of fluid is always available to the pump regardless of reservoir size or fluid level. FPC provides a consistent feed of fluid to the dispensing pump regardless of reservoir fluid level. FPC monitors the pressure of fluid entering the dispense pump and makes adjustments to the reservoir feed pressure, resulting in a consistent feed to the dispense pump
FPC is available in all GPD Global dispense platforms. An offline control system is available to interface with your existing dispense pump. Contact GPD Global +1(970)-245-0408 for details.
Precision Auger Pump was added in May 2016
Precision Auger Pump has been viewed 1242 times