GPD CF-10 Bulk, Loose Radial Lead Former
Company Information:
Name: |
GPD CF-10 Bulk, Loose Radial Lead Former |
Category: |
|
Offered by: |
|
GPD CF-10 Bulk, Loose Radial Lead Former Description:
Forms and Cuts Multiple Leaded Radial Components into Numerous Form Styles
GPD Global Axial precision lead formers have been industry standards since the 1980s, consistently out performing and out living the competition. The CF-10 for bulk or loose Radial components is capable of forming and cutting 2-, 3-, 4-, 5-, and 7-leaded Radial Components.
- Capable of forming loose radial components at rates up to 6,000 parts per hour with a variable speed motor.
- Feed components by hand or with tubes (TO-220s)
- Reduce setup time with quick change tooling and repeatable station settings.
- Forms bulk radial-leaded components to numerous form styles
Component Forms
Here are some of the most common forms produced by the CF-10.
Reducing Form
Reducing Form with Lock In Stand-off
Spread Form
Spread Form with Lock In Stand-off
Lock In Stand-off Form
90 Degree Angle Bend
Flush Mount Lock In Form
Stand-off Lock In Form
Inline Lock In Stand-off Form
Middle Lead Offset Form
Middle Lead Offset with 3 Lead Lock In Form
Middle Lead Offset with Lock In Form
TO-220 Lock In Stand-off
TO-220 Offset toward Heatsink
TO-220 Lock In Offset away from Heatsink
TO-220 Offset away from Heatsink
TO-220 90 Degree Middle Lead Stagger
TO-220 90 Degree toward Heatsink
TO-220 90 Degree away from Heatsink
TO-220 Inline
TO-220 Middle Lead toward Heatsink
TO-220 Middle Lead away from Heatsink
5 Lead TO-220 90 Degree Stagger
5 Lead TO-220 Offset Pattern away from Heatsink
5 Lead TO-220 Offset Centered Pattern
GPD CF-10 Bulk, Loose Radial Lead Former was added in Jun 2021
GPD CF-10 Bulk, Loose Radial Lead Former has been viewed 49 times
20 More Products from Southwest Systems Technology :