SMT Equipment

KYZEN E5611 Stencil And Misprinted Board Cleaner

Company Information:

Southwest Systems sells capital equipment & materials for the electronic & semiconductor manufacturing industries. We cover Texas, Oklahoma, Arkansas, Louisiana, & Mexico except for the states of Sonora & N/S Baja California.

Anna, Texas, USA

Manufacturer, Manufacturer's Representative

  • Phone 972-881-8006
  • Fax 214-342-3949

See Supplier Website »

Company Postings:

(119) products in the catalog

(23) news releases

KYZEN E5611 Stencil And Misprinted Board Cleaner

KYZEN E5611 Stencil And Misprinted Board Cleaner

Name:

KYZEN E5611 Stencil And Misprinted Board Cleaner

Category:

Cleaning Agents

Offered by:

Southwest Systems Technology

KYZEN E5611 Stencil And Misprinted Board Cleaner Description:

KYZEN E5611 is a concentrated aqueous cleaning chemistry designed to remove non-reflowed solder paste and uncured chip bonder adhesives from stencils and hardware following the printing process. E5611 works on a wide range of solder paste technologies, including water soluble, rosin, low residue and synthetic flux compositions. KYZEN E5611 is also effective at removing uncured SMT adhesives used to hold passive components prior to soldering.

KYZEN E5611 is designed for use in aqueous spray-in-air and ultrasonic stencil cleaning machines and is effective at low concentrations and ambient temperature. E5611 is uniquely designed to allow the product to be applied without rinsing however, rinsing with DI water following the cleaning process is recommended. The wash concentration of KYZEN E5611 depends on the soil type and levels of solvency needed to dissolve resin binder present in flux and adhesive compositions.

Application:

  • STENCIL CLEANER

Typical Process

  • Process: Spray & Ultrasonic
  • Concentration: <25%
  • Temperature: Ambient to 120°F/49°C
  • Rinse: Recommended DI Water
  • Dry: Hot Air

Product Properties

  • pH: N/A (Solvent-Based)
  • Flash Point: None to Boiling
  • Boiling Point: 217°F / 103°C
  • Water Soluble: Partial
  • VOC, @ 10% 83.2 g/L

KYZEN E products offer a variety of cleaning solutions for stencils, pallets, and various maintenance applications to remove burned-on fluxes and solders commonly used in electronics assembly manufacturing.

Other KYZEN's Cleaning Products:

  • AQUANOX line of chemistries are concentrated aqueous cleaning chemistries designed for the Electronic Assembly, Aerospace and Automotive industries.  Each product in the line has been specially formulated for a variety of cleaning processes and purposes such as cleaning circuit boards and printed circuit board cleaning.
  • IONOX products are semi-aqueous and solvent cleaning chemistries designed to remove tough soils from electronic assembly and advanced packaging products.
  • CYBERSOLV products are specially formulated for superior performance in benchtop, stencil and maintenance cleaning. Whether for rework, oven cleaning or stencil cleaning CYBERSOLV will outperform anything in its class.
  • MICRONOX products are semiconductor grade cleaning chemistries for defluxing and particulate removal for the Advanced Packaging, Microelectronics and Semiconductor industries.
  • CP line of corrosion protection products offer long term protection for a variety of metals. KYZEN CP products are used to inhibit metal parts while enhancing the removal of a wide range of organic and inorganic soils and provide up to 90 days of inhibition and under some conditions beyond.
  • Solstice Performance Fluid (PF, PF-2A, and PF-HP) are fluorinated solvents that provide exceptional cleaning power and satisfy long-term environmental and safety requirements. Solstice PF solvents have been specially formulated for a variety of cleaning needs and purposes for use in multiple applications such as electronics, metal finishing, and oxygen systems cleaning. Solstice PF has been identified as a replacement for a high-environmental-impact solvent currently used in NASA test facilities. Solstice PF is the recommended chemistry replacement for AK225.
  • The KYZEN Line of Process Enhancement products are ancillary products developed to enhance and support the superior performance of all KYZEN Cleaning Chemistries used in Electronic Assembly, Metal Finishing, Aerospace, and Automotive industries.

KYZEN E5611 Stencil And Misprinted Board Cleaner was added in Jul 2021

KYZEN E5611 Stencil And Misprinted Board Cleaner has been viewed 73 times

20 More Products from Southwest Systems Technology :

MSD Dry Cabinets

IPC Certification Training Schedule IPC Questions and answers