ERSA EASY ARM Fume Extraction
Company Information:
Name: |
ERSA EASY ARM Fume Extraction |
Category: |
|
Offered by: |
|
ERSA EASY ARM Fume Extraction Description:
Ersa solder fume extraction units are based on over 15 years of experience in process air cleaning by Ersa.
They stand out by a high suction power and an efficient filter performance combined with super silent operation. Exhaust volume per arm is 110 m³/h. Both the EASY ARM 1 and EASY ARM 2 are equipped with filters that clean the process air in three stages: The pre-filter absorbs dust and big particles. The combined filter separates micro particles which occur during soldering and absorbs dangerous gas molecules in the incorporated activated carbon filter.
The operator can choose between a system with one exhaust arm – the EASY ARM 1 – and a unit with two exhaust arms – the EASY ARM 2. Both units can be mounted individually by means of their table clamp. Exhaust power is set independently for each extraction arm at the touch of a button. The EASY ARM 1 and EASY ARM 2 use an identical pre-filter and combined filter. Optical and acoustical signals inform the operator when filters have to be exchanged. A wide range of exhaust arms and nozzles for all applications are available so that the user will find the proper solution for his requirements.
For energy saving purposes and to extend filter lifetime, both units can be connected with Ersa i-CON soldering stations or a standby switch. In this way, the extraction unit is only working whilst the attached soldering station is in operation, stopping as soon as the soldering station goes into standby mode
Technical Data:
| Ersa EASY ARM 1 | Ersa EASY ARM 2 | |
| Dimensions (L x W x H), incl. inlet: | 255 mm x 255 mm x 470 mm | 490 mm x 255 mm x 470 mm |
| Weight: | 7.5 kg | 15 kg |
| Volume flow (with new filter): | 1 x 110 m³/h | 2 x 110 m³/h |
| Volume flow of blower: | 1 x 130 m³/h | 2 x 130 m³/h |
| Vacuum: | 1 x 1,800 Pa | 2 x 1,800 Pa |
| Noise level: | 50 dB (A) | 50 dB (A) |
| Filter class Prefilter (mat): Combined filter: |
F7 |
F7 |
| Separation degree (HEPA) Prefilter 1 – 10 μm particles: Combined filter < 1 µm particles: |
80 % – 90 % |
80 % – 90 % |
| Filter area combined filter: | 2.2 m² | 2.2 m² |
| Gas filter: | activated carbon | activated carbon |
| Life time combined filter: (hand soldering) |
1,500 h | 1,500 h |
| Electrical data: | 40 W, 100 – 240 V AC, 50/60 Hz | 80 W, 100 – 240 V AC, 50/60 Hz |
| Fuse: | 6.3 A | 6.3 A |
| Connections: | interface to i-CON soldering stations or standby switch |
interface to i-CON soldering stations or standby switch |
| Item number | 0CA10-001 | 0CA10-002 |
Highlights:
- Efficient 3-stage particle- and gas filtering
- Super silent operation
- Independently adjustable suction power per arm
- Optical and acoustical filter exchange status
- Easy and fast filter exchange – without tools
- Identical filters for EASY ARM 1 and EASY ARM 2
- Interface to interact with i-CON soldering stations
ERSA EASY ARM Fume Extraction was added in Nov 2020
ERSA EASY ARM Fume Extraction has been viewed 149 times
19 More Products from kurtz ersa Corporation :
